Study of an Industrial FEM tool for line boring process of cylinder blocks
dc.contributor.author | TABIBIAN, Shadan |
dc.contributor.author
hal.structure.identifier | LORONG, Philippe
|
dc.date.accessioned | 2015 |
dc.date.available | 2015 |
dc.date.issued | 2015 |
dc.date.submitted | 2015 |
dc.identifier.uri | http://hdl.handle.net/10985/10093 |
dc.description.abstract | The aim of this study is to realize a simple simulation tool, in order to predict the form defect of cylinder block bore liners in the moment of rough boring process. In this study a simple static FEM model, based on the cylinder block geometry, is proposed to predict the form defect of the bore liners in the moment of process. The simulation results put forward that the clamping condition plays an import role in the bore distortion. Consequently, optimizing the clamping pressure and its localization is critical, before cutting parameters adjustment, in line boring process. Experimental validation is performed in parallel with the simulation. The first correlation between experimentation and simulation results shows that the first influent factor which disturbs the correlation is the initial form defect of rough part due to the casting process. Integration of casting form defect in the simulation is crucial and should be taken into account in the next studies. |
dc.language.iso | en |
dc.publisher | Trans Tech Publications |
dc.rights | Post-print |
dc.subject | Machining process |
dc.subject | line boring |
dc.subject | automotive industry |
dc.subject | cylinder block |
dc.subject | force cutting law |
dc.subject | form defect |
dc.subject | FEM modeling |
dc.title | Study of an Industrial FEM tool for line boring process of cylinder blocks |
dc.identifier.doi | 10.4028/www.scientific.net/KEM.651-653.1171 |
dc.typdoc | Communication avec acte |
dc.localisation | Centre de Paris |
dc.subject.hal | Sciences de l'ingénieur: Mécanique |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Génie mécanique |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des structures |
ensam.audience | Internationale |
ensam.conference.title | ESAFORM 2015 |
ensam.conference.date | 2015-04-15 |
ensam.country | Autriche |
ensam.title.proceeding | Key Engineering Materials |
ensam.page | 1171-1182 |
ensam.volume | 651 |
ensam.city | Graz |
hal.identifier | hal-01202975 |
hal.version | 1 |
hal.status | accept |