Show simple item record

dc.contributor.author
 hal.structure.identifier
PUCHI-CABRERA, Eli-Saul
1252 Laboratoire de Mécanique de Lille - FRE 3723 [LML]
dc.contributor.author
 hal.structure.identifier
STAIA, Mariana
211915 Mechanics surfaces and materials processing [MSMP]
dc.contributor.author
 hal.structure.identifier
IOST, Alain
211915 Mechanics surfaces and materials processing [MSMP]
dc.date.accessioned2016
dc.date.available2016
dc.date.issued2015
dc.date.submitted2015
dc.date.submitted2016
dc.identifier.urihttp://hdl.handle.net/10985/10876
dc.description.abstractThe change in the composite hardness with penetration depth derived from nanoindentation tests conducted on coated systems, which involve the deposition of multilayer coatings, in general exhibit a complex shape, as a consequence of the sequential contribution of each coating layer to the composite hardness during indentation loading. In spite that there are a number of models, which have been proposed for describing the change of the composite hardness with penetration depth for monolayer coatings, as well as for determining the coating and substrate hardness, very few research works have addressed the problem of describing this kind of data for multilayer coatings. In the present communication, a rational approach is proposed for extending two models widely used for the analysisof monolayer coatings, in order to describe the composite hardness data of multilayer coatings, as well as for determining the hardness of each individual layer and that of the substrate. Thus, a modified form of the models earlier advanced by Korsunsky et al. [1] and Puchi-Cabrera [2], as well as their computational instrumentation, are proposed. The extension of both models to deal with multilayer coatings is conducted on the basis of the model developed by Iost et al. [3], in order to adapt the Jönsson-Hogmark [4] model to the analysis of indentation data of multilayer coatings. The proposed models are validated employing nanoindentation results obtained from a 2024-T6 aluminum alloy coated with a DLC film, employing electroless NiP as intermediate layer (Fig. 1-2), as well as the results obtained for a ZrN/MoN bilayer deposited onto a 316L stainless steel substrate. The advantages and disadvantages of the different models employed in the analysis are thoroughly discussed.
dc.language.isoen
dc.rightsPost-print
dc.subjectHardness modeling
dc.subjectMultilayer coatings
dc.subjectIindentation loading response
dc.subjectNanoindentation testing
dc.titleModeling the composite hardness of coated systems involving multilayer coatings
dc.typdocCommunication sans acte
dc.localisationCentre de Lille
dc.subject.halSciences de l'ingénieur: Matériaux
dc.subject.halSciences de l'ingénieur: Mécanique: Mécanique des matériaux
ensam.audienceNon spécifiée
ensam.conference.titleIndentation 2014
ensam.conference.date2014-12
ensam.countryFrance
ensam.cityStrasbourg
ensam.peerReviewingOui
ensam.invitedCommunicationNon
ensam.proceedingOui
hal.identifierhal-01326997
hal.version1
hal.statusaccept


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record