Numerical and Experimental Investigations on Deep Drawing of G1151 Carbon Fiber Woven Composites
dc.contributor.author
hal.structure.identifier | GHERISSI, Abderraouf
|
dc.contributor.author
hal.structure.identifier | ABBASSI, Fethi
|
dc.contributor.author
hal.structure.identifier | ZGHAL, Ali
|
dc.contributor.author
hal.structure.identifier | AMMAR, Amine
|
dc.date.accessioned | 2016 |
dc.date.available | 2017 |
dc.date.issued | 2016 |
dc.date.submitted | 2016 |
dc.identifier.issn | 0929-189X |
dc.identifier.uri | http://hdl.handle.net/10985/11147 |
dc.description.abstract | This study proposes to simulate the deep drawing on carbon woven composites in order to reduce the manufacturing cost and waste of composite material during the stamping process, The multi-scale anisotropic approach of woven composite was used to develop a finite element model for simulating the orientation of fibers accurately and predicting the deformation of composite during mechanical tests and forming process. The proposed experimental investigation for bias test and hemispherical deep drawing process is investigated in the G1151 Interlock. The mechanical properties of carbon fiber have great influence on the deformation of carbon fiber composites. In this study, shear angle–displacement curves and shear load–shear angle curves were obtained from a bias extension test. Deep drawing experiments and simulation were conducted, and the shear load–displacement curves under different forming depths and shear angle–displacement curves were obtained. The results showed that the compression and shear between fibers bundles were the main deformation mechanism of carbon fiber woven composite, as well as the maximum shear angle for the composites with G1151 woven fiber was 58°. In addition, during the drawing process, it has been found that the forming depth has a significant influence on the drawing force. It increases rapidly with the increasing of forming depth. In this approach the suitable forming depth deep drawing of the sheet carbon fiber woven composite was approximately 45 mm. |
dc.language.iso | en |
dc.publisher | Springer Verlag (Germany) |
dc.rights | Post-print |
dc.subject | Carbon fiber woven |
dc.subject | Bias test |
dc.subject | Shear angle |
dc.subject | Anisotropic approach |
dc.subject | Finite elements modelling |
dc.subject | Forming |
dc.title | Numerical and Experimental Investigations on Deep Drawing of G1151 Carbon Fiber Woven Composites |
ensam.embargo.terms | 2017-06 |
dc.identifier.doi | 10.1007/s10443-015-9468-x |
dc.typdoc | Article dans une revue avec comité de lecture |
dc.localisation | Centre de Angers |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des fluides |
ensam.audience | Internationale |
ensam.page | 461-476 |
ensam.journal | Applied Composite Materials |
ensam.volume | 23 |
ensam.issue | 3 |
ensam.peerReviewing | Oui |
hal.description.error | {"duplicate-entry":{"hal-01361888":{"doi":"1.0","ensam":"1.0"}}} |
hal.identifier | hal-01361888 |
hal.version | 1 |
hal.submission.permitted | updateMetadata |
hal.status | accept |
dc.identifier.eissn | 1573-4897 |