Method of hole shrinkage radial forces measurement in Ti6 Al4V drilling
Communication avec acte
Résumé
This work deals with the phenomenon of hole shrinkage during Ti6Al4V drilling. Indeed, the shape and dimensions of the drilled hole, as well as the heat generated by the operation depend on this phenomenon which is caused by multiple factors, including the relaxation of internal residual stresses, thermal expansion and diverse thermome chanical loads applied to the workpiece and the tool. Nevertheless, the present study focuses only on the mechanical aspect and especially aims atshowing the development of an innovative method to measure the radial forces induced by the hole shrinkage phenomenon.
Fichier(s) constituant cette publication
- Nom:
- LABOMAP_PROCCIRP_2017_MERZOUKI.pdf
- Taille:
- 697.8Ko
- Format:
- Description:
- Article principal
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication avec acteThe CFRP cutting mechanisms are highly linked to fibers orientations. Firstly, this paper deals with a mechanical characterization of CFRP under cryogenic temperatures. An instrumented compressive test with fibers oriented ...
-
Communication avec acteCHERIF, Iheb; OUTEIRO, José; COTTON, Dominique; POULACHON, Gérard; CHARRONDIERE, Guillaume; BROSSE, Alexandre (Elsevier BV, 2019)Heat exchangers in new nuclear power generation plants are made of thin AISI 316L stainless-steel plates stacked together in order to improve their efficiency and compactness. To ensure the assembly, the global distortion ...
-
Communication avec actePOULACHON, Gérard; OUTEIRO, José; RAMIREZ, Christophe; ANDRÉ, Victorien; ABRIVARD, Guillaume (Elsevier, 2016)This paper deals with the hole surface quality when CFRP drilling. Mechanical instrumented operations have enabled to follow precisely the damage on the tool margins and the main cutting edges. The amount of uncut fibers ...
-
Communication avec acteCAMPOCASSO, Sébastien; COSTES, Jean-Philippe; POULACHON, Gérard; PEREZ-DUARTE, Alexis (Trans Tech Publications, www.scientific.net, 2011)In turning, the applied forces have to be known as accurately as possible, especially in the case of difficult-to-cut materials for aircraft workpieces finishing operations. Traditionally, edge discretisation methodology ...
-
Article dans une revue avec comité de lectureDENGUIR, Lamice; BESNARD, Aurélien; FROMENTIN, Guillaume; POULACHON, Gérard; ZHU, Xiaowen (Taylor & Francis, 2014)One of the criteria mastering the choice of a cutting tool is its wear resistance. In this paper, tool life is treated: on one hand, the study aims to classify the performances of the edge preparations in terms of ...