Influence of the Manufacturing Process of a Claw-Pole Alternator on Its Stator Shape and Acoustic Noise
| dc.contributor.author
hal.structure.identifier | TAN-KIM, Antoine
|
| dc.contributor.author
hal.structure.identifier | HAGEN, Nicolas
|
| dc.contributor.author
hal.structure.identifier | LANFRANCHI, Vincent
|
| dc.contributor.author
hal.structure.identifier | CLENET, Stéphane
|
| dc.contributor.author
hal.structure.identifier | MIPO, Jean-Claude
|
| dc.contributor.author
hal.structure.identifier | LEGRANGER, Jerome
|
| dc.contributor.author
hal.structure.identifier | PALLESCHI, Frédéric
|
| dc.contributor.author
hal.structure.identifier | COOREVITS, Thierry
|
| dc.date.accessioned | 2018 |
| dc.date.available | 2018 |
| dc.date.issued | 2017 |
| dc.date.submitted | 2017 |
| dc.date.submitted | 2018 |
| dc.identifier.issn | 0093-9994 |
| dc.identifier.uri | http://hdl.handle.net/10985/12995 |
| dc.description.abstract | This paper shows the influence of the manufacturing process of a claw-pole alternator on its acoustic noise. First, the stator welds and the assembly of the stator in the brackets are linked to deformations of the inner diameter of the stator. Then, the influences of these deformations on the magnetic forces and the subsequent acoustic noise are investigated. Results show that the deformations caused by the manufacturing process significantly increase the sound power level of particular orders. |
| dc.language.iso | en |
| dc.publisher | Institute of Electrical and Electronics Engineers |
| dc.rights | Post-print |
| dc.subject | Acoustic noise |
| dc.subject | Tolerance |
| dc.subject | manufacturing imperfections |
| dc.subject | Claw Pole Alternator |
| dc.title | Influence of the Manufacturing Process of a Claw-Pole Alternator on Its Stator Shape and Acoustic Noise |
| dc.identifier.doi | 10.1109/TIA.2017.2708019 |
| dc.typdoc | Article dans une revue avec comité de lecture |
| dc.localisation | Centre de Lille |
| dc.subject.hal | Sciences de l'ingénieur: Energie électrique |
| ensam.audience | Internationale |
| ensam.page | 4389 - 4395 |
| ensam.journal | IEEE Transactions on Industry Applications |
| ensam.volume | 53 |
| ensam.issue | 5 |
| ensam.peerReviewing | Oui |
| hal.identifier | hal-01769022 |
| hal.version | 1 |
| hal.status | accept |
Files in this item
This item appears in the following Collection(s)
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lecture; ; ; ; ; ; ;
COOREVITS, Thierry (Institute of Electrical and Electronics Engineers, 2017)
This paper shows the influence of the manufacturing process of a claw-pole alternator on its acoustic noise. First, the stator welds and the assembly of the stator in the brackets are linked to deformations of the inner ... -
Article dans une revue avec comité de lecture; ; ; ; ; ; ; ;COOREVITS, Thierry (IOS Press, 2019)
This work enlightens the impact of punching on a specific stator performances. Two specimens type are withdrawn from a M330A35 punched lamination sheet. One type represents a closed magnetic circuit while the other represents ...
-
Article dans une revue avec comité de lecture; ; ; ;COOREVITS, Thierry (Institute of Electrical and Electronics Engineers, 2015)
In mass production, fabrication processes of electrical machines are not perfectly repeatable with time, leading to dispersions on the dimensions which are not equal to their nominal values. The issue is then to link the ...
-
Article dans une revue avec comité de lecture(Institute of Electrical and Electronics Engineers, 2017)Meta-models proved to be a very efficient strategy for optimization of expensive black-box models, e.g. Finite Element simulation for electromagnetic devices. It enables to reduce the computational burden for optimization ...
-
Article dans une revue avec comité de lecture(Institute of Electrical and Electronics Engineers, 2021)In this paper, an experimental procedure is presented in order to handle magnetic measurements under uniaxial tensile stress reaching the plastic domain. The main advantage of the proposed procedure is that it does not ...
