Comparing failure tests on pharmaceutical tablets: Interpretation using experimental results and a numerical approach with cohesive zone models
Article dans une revue avec comité de lecture
Date
2023-07Journal
International Journal of PharmaceuticsRésumé
The mechanical strength is an important quality attribute of pharmaceutical tablets. It can be determined using different failure tests like the Brazilian test or the three-point bending test. Nevertheless, literature shows that different failure tests often give conflicting values of tensile strengths (TS), which are generally calculated using the maximum stress criterion as a failure criterion. This work started from the hypothesis that these discrepancies are in fact due to the application of this criterion which is not suited to study pharmaceutical tablets, first due to heterogeneity of the stress distributions during the tests and second due to the quasi-brittle nature of pharmaceutical tablets. As an alternative, a numerical fracture criterion which is known to be well-suited for quasi-brittle solids (cohesive zone model, CZM) was used and calibrated using experiments. Using this approach, the breaking forces obtained numerically were shown to be in fair agreement with the experimental ones. Above all, the numerical results made it possible to catch the trends when comparing the different failure tests one to another. Especially, the model made it possible to retrieve the factor 2 between the TS obtained by three-point bending and by diametral compression found in the literature.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureMAZEL, Vincent; GUERARD, Sandra; CROQUELOIS, Benjamin; GIRARDOT, Jérémie; DIARRA, Harona; BUSIGNIES, Virginie; TCHORELOFF, Pierre; KOPP, Jean-Benoit (Elsevier, 2016)Mechanical strength is an important critical quality attribute for tablets. It is classically measured, in the pharmaceutical field, using the diametral compression test. Nevertheless, due to small contact area between the ...
-
Article dans une revue avec comité de lectureCROQUELOIS, Benjamin; GIRARDOT, Jérémie; CAZAUTETS, Clément; TCHORELOFF, Pierre; MAZEL, Vincent; KOPP, Jean-Benoit (Elsevier, 2017)Mechanical strength is an important property for pharmaceutical tablets. Its study using the theory of linear elastic fracture mechanics has been introduced in the pharmaceutical field through the Brittle Fracture Index ...
-
Article dans une revue avec comité de lectureThis work aims to propose a new damaging beam-lattice model using the Discrete Element Method paradigm dedicated to the simulation of quasi-brittle fracture under complex loadings. Enrichment of the elastic Euler–Bernoulli ...
-
Article dans une revue avec comité de lectureUnderstanding the mechanical behavior of materials in working conditions is a current problem in transport industries. In this article, we demonstrate why the temperature and the strain-rate are first-order parameters when ...
-
Article dans une revue avec comité de lectureThis study focuses on the microstructural aspects of a cork-based by-product known as agglomerated cork and its influence on the compressive mechanical behaviour. The material consists in granulates of a natural polymeric ...