The influence of position in overlap joints of Mg and Al alloys on microstructure and hardness of laser welds
| dc.contributor.author
hal.structure.identifier | BANNOUR, Sana
|
| dc.contributor.author | ABDERRAZAK, Kamel |
| dc.contributor.author
hal.structure.identifier | MATTEI, Simone
|
| dc.contributor.author
hal.structure.identifier | AUTRIC, Michel
|
| dc.contributor.author | MHIRI, Hatem |
| dc.contributor.author
hal.structure.identifier | MASSE, Jean-Eric
|
| dc.date.accessioned | 2013 |
| dc.date.available | 2013 |
| dc.date.issued | 2013 |
| dc.date.submitted | 2013 |
| dc.identifier.uri | http://hdl.handle.net/10985/6857 |
| dc.description.abstract | Structure and properties of laser beam welding zone of dissimilar materials, AZ31 magnesium alloy and A5754 Aluminum alloy, are investigated. The microstructure and quality of the Mg/Al weld were studied by metallography, microhardness and optical microscopy. Differences in physical and mechanical properties of both materials, magnesium and aluminum, affect weldability and resistance of this combination, and lead to the formation of intermetallic compounds in the welded metal. |
| dc.language.iso | en_US |
| dc.publisher | Journal of Laser application |
| dc.rights | Post-print |
| dc.subject | laser welding |
| dc.subject | magnesium alloy |
| dc.subject | aluminum alloy |
| dc.title | The influence of position in overlap joints of Mg and Al alloys on microstructure and hardness of laser welds |
| dc.identifier.doi | 10.2351/1.4792615 |
| dc.typdoc | Article dans une revue avec comité de lecture |
| dc.localisation | Centre de Aix en Provence |
| dc.subject.hal | Sciences de l'ingénieur: Matériaux |
| dc.subject.hal | Sciences de l'ingénieur: Optique / photonique |
| ensam.audience | Internationale |
| ensam.page | 032001 - 032008 |
| ensam.journal | The influence of position in overlap joints of Mg and Al alloys on microstructure and hardness of laser welds |
| ensam.volume | 25 |
| ensam.issue | 3 |
| hal.identifier | hal-00799202 |
| hal.version | 1 |
| hal.status | accept |
Files in this item
This item appears in the following Collection(s)
Related items
Showing items related by title, author, creator and subject.
-
Communication avec acte; ; ; ;
MASSE, Jean-Eric (SPIE, 2014)
Dissimilar laser beam welding between A5754 Al alloy and AZ31 Mg alloy with the plate thickness of 2 mm was investigated. Complex flow pattern characterized by a large volume of intermetallic compounds Al12Mg17 and Al3Mg2 ... -
Article dans une revue avec comité de lecture; ; ;MASSE, Jean-Eric (Elsevier, 2010)
A laser surface melting treatment (LSMT) was performed on a ZE41 Mg-alloy using an excimer KrF laser. The laser-melted layer depth depends on the laser scan speed. The morphology and the microstructure of the laser-melted ...
-
Article dans une revue avec comité de lectureMASSE, Jean-Eric; FABRE, Agnès (Elsevier, 2012)
The use of magnesium alloys in engineering applications is becoming increasingly important as a relatively low density allows savings in energy consumption and therefore reduction in air pollution. An associated reduction ...
-
Article dans une revue avec comité de lecture; ; ; ; ; ;MASSE, Jean-Eric (Trans Tech Publications, 2020)
In this work, the Yb:YAG laser beam welding of the magnesium alloy AM60 was studied. A laser power of 2 kW and a welding speed of 3.5 m / min give a different welding quality than that obtained by CO2 laser with the same ...
-
Article dans une revue avec comité de lecture; ; ;MASSE, Jean-Eric; (Elsevier, 2010)
In this paper, a three-dimensional finite element model is developed to simulate thermal history magnesium-based alloys during laser beam welding. Space–time temperature distributions in weldments are predicted from the ...
