Fault Tolerant Multiphase Electrical Drives: The Impact of Design
| dc.contributor.author | LOCMENT, Fabrice |
| dc.contributor.author
hal.structure.identifier | SEMAIL, Eric
|
| dc.contributor.author | KESTELYN, Xavier |
| dc.date.accessioned | 2013 |
| dc.date.available | 2013 |
| dc.date.issued | 2008 |
| dc.date.submitted | 2013 |
| dc.identifier.issn | 1286-0042 |
| dc.identifier.uri | http://hdl.handle.net/10985/6976 |
| dc.description | La version editeur de cet article est disponible à l'adresse suivante : http://journals.cambridge.org/action//displayFulltext?type=1&fid=8024174&jid=JAP&volumeId=43&issueId=02&aid=8024172&bodyId=&membershipNumber=&societyETOCSession= |
| dc.description.abstract | This paper deals with fault tolerant multiphase electrical drives. The quality of the torque of a vector-controlled Permanent Magnet (PM) Synchronous Machine supplied by a multi-leg Voltage Source Inverter (VSI) is examined in normal operation and when one or two phases are open-circuited. It is then deduced that a seven-phase machine is a good compromise allowing high torque-to-volume density and easy control with smooth torque in fault operation. Experimental results confirm the predicted characteristics. |
| dc.language.iso | en |
| dc.publisher | EDP Sciences |
| dc.rights | Post-print |
| dc.subject | Multiphase machine |
| dc.subject | Fault tolerance |
| dc.subject | design |
| dc.subject | Synchronous machine |
| dc.subject | Axial Flux machine |
| dc.title | Fault Tolerant Multiphase Electrical Drives: The Impact of Design |
| dc.identifier.doi | 10.1051/epjap:2008057 |
| dc.typdoc | Article dans une revue avec comité de lecture |
| dc.localisation | Centre de Lille |
| dc.subject.hal | Sciences de l'ingénieur: Automatique / Robotique |
| dc.subject.hal | Sciences de l'ingénieur: Electromagnétisme |
| dc.subject.hal | Sciences de l'ingénieur: Energie électrique |
| ensam.audience | Internationale |
| ensam.page | 159-162 |
| ensam.journal | European Physical Journal: Applied Physics |
| ensam.volume | 43 |
| ensam.issue | 2 |
| hal.identifier | hal-00819009 |
| hal.version | 1 |
| hal.status | accept |
| dc.identifier.eissn | 1286-0050 |
Files in this item
This item appears in the following Collection(s)
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lecture;
SEMAIL, Eric; KESTELYN, Xavier (Institute of Electrical and Electronics Engineers, 2008)
This paper deals with easy-to-implement control strategies when a seven-phase axial flux permanent magnet machine supplied by a seven-leg voltage source inverter is in fault operation mode. Using a vectorial multimachine ... -
Communication avec acte; ; ; ; ; ;SEMAIL, Eric (IEEE, 2008)
This paper deals with the modeling and the control of a new high power 12V Integrated Starter Alternator (ISA). This system is used to bring micro-hybrid functions to standard Internal Combustion Engine (ICE) vehicles. The ...
-
Article dans une revue avec comité de lecture; ;SEMAIL, Eric (Institute of Electrical and Electronics Engineers, 2006)
In this paper, a 7-phase Axial-flux Double-rotor Permanent Magnet Synchronous Machine is studied using analytical and Finite Element methods. This type of machine shows a higher sensitivity to the inductance harmonics and ...
-
Identification of a 7-phase claw-pole starter-alternator for a micro-hybrid automotive application Communication avec acte; ;SEMAIL, Eric; ; ; ; (IEEE, 2008)
This paper deals with the identification of a new high power starter-alternator system, using both: a Finite Element Method (FEM) modeling and an experimental vector control. The drive is composed of a synchronous 7-phase ...
-
Communication avec acte; ; ;SEMAIL, Eric (IEEE, 2008)
Risk of irreversible magnet demagnetization during short-circuit fault is analyzed in case of an axial-flux dual-rotor machine, using a three-dimensional finite-element method (3D-FEM). In order to validate the numerical ...
