On using the leveling of the free surface of a Newtonian fluid to measure viscosity and Navier slip length
dc.contributor.author
hal.structure.identifier | GILORMINI, Pierre
|
dc.contributor.author
hal.structure.identifier | TEYSSEDRE, Hubert
|
dc.date.accessioned | 2013 |
dc.date.available | 2013 |
dc.date.issued | 2013 |
dc.date.submitted | 2013 |
dc.identifier.issn | 1364-5021 |
dc.identifier.uri | http://hdl.handle.net/10985/7394 |
dc.description | Version éditeur : http://rspa.royalsocietypublishing.org/content/469/2160/20130457.short |
dc.description.abstract | Measuring the relaxation time involved in the leveling of the free surface of a Newtonian fluid laid on a substrate can give access to material parameters. It is shown here how most favorable pattern geometries of the free surface and film thicknesses can be defined for the measures of viscosity and Navier slip length at the fluid-solid interface, respectively. Moreover, special emphasis is put on the conditions required to avoid shear-thinning by controling the maximum shear rate. For initially sinusoidal patterns with infinitesimal amplitudes, an analytical solution including slip at the fluid-solid interface is used, and numerical simulations based on the natural element method allow to discuss the effect of finite amplitudes. This leads to the definition of a relevance domain for the analytical solution that avoids the need for numerical simulations in practical applications. It is also shown how these results can be applied to crenelated profiles, where Fourier series expansion can be used, but with caution. |
dc.description.sponsorship | ANR programme SINCRONE |
dc.language.iso | en |
dc.publisher | Royal Society, The |
dc.rights | Post-print |
dc.subject | polymers |
dc.subject | leveling |
dc.subject | viscosity |
dc.subject | Navier slip |
dc.subject | slip length |
dc.title | On using the leveling of the free surface of a Newtonian fluid to measure viscosity and Navier slip length |
dc.identifier.doi | 10.1098/rspa.2013.0457 |
dc.typdoc | Article dans une revue avec comité de lecture |
dc.localisation | Centre de Paris |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des fluides |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des matériaux |
ensam.audience | Internationale |
ensam.page | 6-24 |
ensam.journal | Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences |
ensam.volume | 469 |
ensam.issue | 2160 |
hal.description.error | The supplied XML description does not validate the AOfr schema |
hal.identifier | hal-00872587 |
hal.version | 1 |
hal.submission.permitted | updateMetadata |
hal.status | accept |
dc.identifier.eissn | 1471-2946 |