Effect of surface finishing such as sand-blasting and CrAlN hard coatings on the cutting edge’s peeling tools’ wear resistance
dc.contributor.author | LABIDI, Chafik |
dc.contributor.author | BENLATRECHE, Yacine |
dc.contributor.author
hal.structure.identifier | DJOUADI, Mohamed Abdou
|
dc.contributor.author
hal.structure.identifier | NOUVEAU, Corinne
|
dc.contributor.author | COLLET, Robert |
dc.date.accessioned | 2013 |
dc.date.available | 2013 |
dc.date.issued | 2009 |
dc.date.submitted | 2013 |
dc.identifier.issn | 0043-1648 |
dc.identifier.uri | http://hdl.handle.net/10985/7626 |
dc.description | The authors would like to thank IonBond (Chassieu-France) who made the sand-blasting treatments and the Regional Council of Burgundy and CTBA (Wood and Furniture Technical Centre) for their financial support. |
dc.description.abstract | The aim of this study is first to define the effect of a surface finishing such as sand-blasting on the geometry of a wood cutting tool and its wear resistance. In addition, the effectiveness of surface coatings like CrAlN deposited by physical vapor deposition (PVD) technique on conventional and sand-blasted cutting edges was studied. A reference tool and different sand-blasted ones were tested by micro-peeling of beech in a laboratory. Microscopic observations, cutting forces measurement and cutting wear tests were carried out to quantify the behavior of these tools. The results obtained showed that the artificial wear by sandblasting leads to an increase in the wear resistance and coating effectiveness, and completely changes the type of damage done to the tools. The sand-blasting application combined or not with CrAlN coating showed an improvement in the wear resistance of the tools and a modification of the forces during the peeling process. The effectiveness of the CrAlN layers was improved thanks to the sand-blasting treatment and then the duplex ones performed better. |
dc.description.sponsorship | Regional Council of Burgundy CTBA (Wood and Furniture Technical Centre) |
dc.language.iso | en |
dc.publisher | Elsevier |
dc.rights | Post-print |
dc.subject | Sand-blasting |
dc.subject | CrAlN |
dc.subject | Wood machining |
dc.subject | Wear resistance |
dc.title | Effect of surface finishing such as sand-blasting and CrAlN hard coatings on the cutting edge’s peeling tools’ wear resistance |
dc.identifier.doi | 10.1016/j.wear.2009.01.045 |
dc.typdoc | Article dans une revue avec comité de lecture |
dc.localisation | Centre de Cluny |
dc.subject.hal | Physique: matière Condensée: Science des matériaux |
dc.subject.hal | Sciences de l'ingénieur: Matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des matériaux |
dc.subject.hal | Sciences de l'ingénieur: Plasmas |
ensam.audience | Internationale |
ensam.page | 1062-1067 |
ensam.journal | Wear |
ensam.volume | 267 |
ensam.issue | 5-8 |
hal.description.error | The argument 'doi' (value = '10.1016/j.wear.2009.01.045') included in the request is allready on HAL |
hal.status | unsent |