Manufacturing requirements in design: The RTM process in aeronautics
dc.contributor.author
hal.structure.identifier | MOUTON, Serge
|
dc.contributor.author
hal.structure.identifier | TEISSANDIER, Denis
|
dc.contributor.author
hal.structure.identifier | SEBASTIAN, Patrick
|
dc.contributor.author
hal.structure.identifier | NADEAU, Jean-Pierre
|
dc.date.accessioned | 2014 |
dc.date.available | 2014 |
dc.date.issued | 2008 |
dc.date.submitted | 2014 |
dc.identifier.uri | http://hdl.handle.net/10985/7918 |
dc.description.abstract | A sub-unit of an aeronautical structure (fuselage, fin, wing, etc.) consists of a set of components fixed rigidly together. One of today’s major industrial challenges is to produce these sub-units out of composite materials in order to increase the level of integration and reduce and cost. This article describes a procedure to assist in the industrialisation of aeronautical components produced from composite materials in a design for manufacturing context. In a multi-expertise approach, the problem of optimising integration is combined with the feasibility of injection for the Resin Transfer Molding process. This approach then takes into account admissible manufacturing deviations, defined from a classification of the structure parts. The limits set for admissible deviations guarantee the mechanical behaviour of the assembled component and the requirements of the assembly as a whole. Finally, an industrialisation solutions space is defined. A constraint satisfaction problem solver is used to carry out this research with a spar from a horizontal plane in an aircraft used to illustrate the procedure. |
dc.language.iso | en |
dc.rights | Post-print |
dc.subject | Resin Transfer Molding (RTM) |
dc.subject | assembly |
dc.subject | residual stresses |
dc.subject | industrialisation |
dc.subject | strain |
dc.subject | geometric specification for non-rigid parts |
dc.subject | Constraint Satisfaction Problem (CSP) solver |
dc.title | Manufacturing requirements in design: The RTM process in aeronautics |
dc.typdoc | Communication avec acte |
dc.localisation | Centre de Bordeaux-Talence |
dc.subject.hal | Sciences de l'ingénieur: Matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Génie mécanique |
ensam.audience | Internationale |
ensam.conference.title | 9th international conference on flow processes in composite materials. FPCM-9 [Multimédia multisupport] : 8-10 July, 2008 |
ensam.conference.date | 2008-07 |
ensam.country | Canada |
ensam.title.proceeding | 9th international conference on flow processes in composite materials. FPCM-9 [Multimédia multisupport] : 8-10 July, 2008 |
ensam.page | 8p. |
hal.identifier | hal-00971367 |
hal.version | 1 |
hal.submission.permitted | updateMetadata |
hal.status | accept |