Effect of the sand-blasting of edge peeling tools on the cutting forces and wear resistance
dc.contributor.author | LABIDI, Chafik |
dc.contributor.author | HENRY, Laurent |
dc.contributor.author
hal.structure.identifier | NOUVEAU, Corinne
|
dc.contributor.author | DENAUD, Louis |
dc.contributor.author | COLLET, Robert |
dc.date.accessioned | 2014 |
dc.date.available | 2016 |
dc.date.issued | 2007 |
dc.date.submitted | 2013 |
dc.identifier.isbn | 978-2-88074-725-1 |
dc.identifier.uri | http://hdl.handle.net/10985/8315 |
dc.description.abstract | One of the major problems concerning tools of wood industry is nicks occurrence on the cutting edge. This phenomenon is accentuated by the small tool angle of most of the wood machining tools. The aim of this present study is to look if the geometry modifications of the cutting edge permit to decrease the weakness of the tools, especially in peeling process. For this, different sand-blasted tools were tested in laboratory peeling of beech. In addition, the adhesion of CrAlN hard coating deposited on a modified cutting edge was also explored. The results obtained showed that the artificial wear by sand-blasting permits to increase the shocks resistance, coatings anchoring and changes the wear mechanism of the tools. |
dc.description.sponsorship | Regional Council of Burgundy, CTBA and IonBond France |
dc.language.iso | en |
dc.publisher | Presses Polytechniques et Universitaires Romandes |
dc.rights | Post-print |
dc.subject | CrAlN |
dc.subject | Sand-blasting |
dc.subject | peeling of beech |
dc.subject | steel cutting tools |
dc.subject | Wood machining |
dc.title | Effect of the sand-blasting of edge peeling tools on the cutting forces and wear resistance |
ensam.embargo.terms | 2 years |
dc.typdoc | Communication avec acte |
dc.localisation | Centre de Cluny |
dc.subject.hal | Physique: matière Condensée: Science des matériaux |
dc.subject.hal | Sciences de l'ingénieur: Matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des matériaux |
ensam.audience | Internationale |
ensam.conference.title | International symposium on wood machining (03 ; 2007 ; Lausanne, Suisse) |
ensam.conference.date | 2007-05 |
ensam.country | Switzerland |
ensam.title.proceeding | Proceedings of the 3rd International Symposium on Wood Machining (ISWM) |
ensam.page | 229-232 |
ensam.volume | - |
ensam.issue | - |
hal.identifier | hal-01017536 |
hal.version | 1 |
hal.submission.permitted | updateMetadata |
hal.status | accept |