Digital image correlation as a usefful tool of analysis of hot cutting process
dc.contributor.author | MOULART, Raphaël |
dc.contributor.author | FOUILLAND-PAILLE, Laurence |
dc.contributor.author
hal.structure.identifier | EL MANSORI, Mohamed
|
dc.date.accessioned | 2014 |
dc.date.available | 2014 |
dc.date.issued | 2013 |
dc.date.submitted | 2014 |
dc.identifier.uri | http://hdl.handle.net/10985/8407 |
dc.description.abstract | This study deals with the use of Digital Image Correlation (DIC) to investigate the physical phenomena taking place during the orthogonal cutting of a SG iron specimen at high temperature (around 1,000 °C). After h aving recalled the scientific and industrial context, the experimental procedure developed to record the pictures of the tool covered with a speckle pattern at a frequency of 10,000 Hz (thanks to a high speed camera) is explained. The quantitative exploitation of these recordings is leading to a first set of results showing how the cutting speed and the rake angle of the tool have an influence on the physics of the cutting operation. |
dc.description.sponsorship | Arts et Métiers ParisTech - DGARI |
dc.language.iso | en |
dc.rights | Post-print |
dc.title | Digital image correlation as a usefful tool of analysis of hot cutting process |
dc.typdoc | Communication avec acte |
dc.localisation | Centre de Châlons-en-Champagne |
dc.subject.hal | Sciences de l'ingénieur: Matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des solides |
ensam.audience | Internationale |
ensam.conference.title | Photomécanique |
ensam.conference.date | 2013-05-29 |
ensam.country | France |
ensam.title.proceeding | Photomécanique 2013 |
ensam.page | 3pp |
hal.identifier | hal-01058715 |
hal.version | 1 |
hal.submission.permitted | updateMetadata |
hal.status | accept |