Friction behavior of laser cladding magnesium alloy against AISI 52100 steel
Article dans une revue avec comité de lecture
Date
2012Journal
Tribology InternationalAbstract
The use of magnesium alloys in engineering applications is becoming increasingly important as a relatively low density allows savings in energy consumption and therefore reduction in air pollution. An associated reduction in inertia makes these alloys potential candidates for friction components, but they suffer from poor wear resistance. Laser surface alloying with appropriate powder mixture is an innovative technique to improve surface properties of metallic alloys. In this study, the effect of laser surface alloying using Al12%Si powder on wear resistance of a magnesium alloy ZE41 is investigated. Hardness and wear resistance of the alloy are significantly enhanced after treatment.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureA laser surface melting treatment (LSMT) was performed on a ZE41 Mg-alloy using an excimer KrF laser. The laser-melted layer depth depends on the laser scan speed. The morphology and the microstructure of the laser-melted ...
-
Article dans une revue avec comité de lectureOUALLAM, Seddik; PEYRE, Patrice; DJEGHLAL, Lamine; GUITTONNEAU, Fabrice; BOUTAGHOU, Zoheir; KABA, Liamine; MASSE, Jean-Eric (Trans Tech Publications, 2020)In this work, the Yb:YAG laser beam welding of the magnesium alloy AM60 was studied. A laser power of 2 kW and a welding speed of 3.5 m / min give a different welding quality than that obtained by CO2 laser with the same ...
-
Article dans une revue avec comité de lectureBANNOUR, Sana; ABDERRAZAK, Kamel; MATTEI, Simone; AUTRIC, Michel; MHIRI, Hatem; MASSE, Jean-Eric (Journal of Laser application, 2013)Structure and properties of laser beam welding zone of dissimilar materials, AZ31 magnesium alloy and A5754 Aluminum alloy, are investigated. The microstructure and quality of the Mg/Al weld were studied by metallography, ...
-
Communication avec acteDissimilar laser beam welding between A5754 Al alloy and AZ31 Mg alloy with the plate thickness of 2 mm was investigated. Complex flow pattern characterized by a large volume of intermetallic compounds Al12Mg17 and Al3Mg2 ...
-
Article dans une revue avec comité de lectureBELHADJ, Asma; BESSROUR, Jamel; BOUHAFS, Mahmoud; MASSE, Jean-Eric; BARRALLIER, Laurent (Elsevier, 2010)In this paper, a three-dimensional finite element model is developed to simulate thermal history magnesium-based alloys during laser beam welding. Space–time temperature distributions in weldments are predicted from the ...