Impact on thermomechanical behaviour of a maleic anhydride grafted ABS on ABS/PC multi-layered blends
dc.contributor.author
hal.structure.identifier | GERVAIS, Matthieu
|
dc.contributor.author
hal.structure.identifier | ALKHUDER, A
|
dc.contributor.author
hal.structure.identifier | GRANDMONTAGNE, A.
|
dc.contributor.author
hal.structure.identifier | GUINAULT, Alain
|
dc.contributor.author
hal.structure.identifier | SOLLOGOUB, Cyrille
|
dc.date.accessioned | 2014 |
dc.date.available | 2014 |
dc.date.issued | 2013 |
dc.date.submitted | 2014 |
dc.date.submitted | 2014 |
dc.identifier.uri | http://hdl.handle.net/10985/8464 |
dc.description.abstract | The significant increase of Waste Electric and Electronic Equipment (WEEE) has led to an important research in upgrading recycled engineering plastics by means of a blending technique. In particular, there is an interest in studying the properties of ABS/PC blends, the two most important components of WEEE, at ABS rich compositions, according to the generation ratio of waste [1]. Since ABS and PC are immiscible, the final properties depend to a large extent on the flow-induced morphology [2]. In order to better control the final blend morphology of injection molded samples, we propose a two-step approach: the first step consists in producing pellets with multilayered structure, using a multilayer coextrusion device. During the second subsequent step, the pellets are injection molded, with temperature conditions chosen to minimize the deformation of the created structures. The effect of a compatibilizer, namely, an ABS grafted with maleic anhydride (ABS-g-MA) [3] on the thermomechanical properties and morphology has been investigated. |
dc.language.iso | en_US |
dc.rights | Post-print |
dc.title | Impact on thermomechanical behaviour of a maleic anhydride grafted ABS on ABS/PC multi-layered blends |
dc.typdoc | Communication sans acte |
dc.localisation | Centre de Paris |
dc.subject.hal | Sciences de l'ingénieur: Matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique |
ensam.conference.title | European Polymer Forum 2013, Pise, Italy, 16-21 juin |
ensam.conference.date | 2013-06-16 |
ensam.country | Italy |
hal.identifier | hal-01061257 |
hal.version | 1 |
hal.status | accept |