Show simple item record

dc.contributor.authorDAUSEINS, J
dc.contributor.authorEL MAZRY, Chaker
dc.contributor.authorMALLET, J
dc.contributor.authorCORREC, Olivier
dc.contributor.author
 hal.structure.identifier
COLIN, Xavier
86289 Laboratoire Procédés et Ingénierie en Mécanique et Matériaux [PIMM]
dc.date.accessioned2014
dc.date.available2014
dc.date.issued2014
dc.date.submitted2014
dc.identifier.issn0299-7258
dc.identifier.urihttp://hdl.handle.net/10985/8501
dc.description.abstractWith the aim to study the long-term behavior of accessories used in the tap domestic water supply system, the Centre scientifique et technique du bâtiment (CSTB) has developed a tool dedicated to accelerated ageing tests with chlorine dioxide in the experimental platform Aquasim. First studies performed with this tool show that this tap water disinfectant also attacks polymeric materials. Initially used for destroying micro-organisms, it is not totally selective since it also initiates oxidation radical chains in polymeric materials. This study is focused on additive free PA 66. Thin films samples were exposed to chlorine dioxide then characterized at different structural scales in the laboratory. One observes an oxidation and a sharp and extremely important decrease in the molar mass of PA 66 regardless the tested chlorine dioxide concentration. PA 66 embrittlement happens when the number average molar mass becomes lower than a critical value of about 17 ± 2 kg/mol. A kinetic model has been deduced from the mechanistic scheme of oxidation initiated by the radical attack of chlorine dioxide to predict, in a near future, the material lifetime. The model simulations match with experimental results.
dc.language.isofr
dc.publisherASTEE/EDP Sciences
dc.rightsPost-print
dc.subjectwater distribution systems inside buildings
dc.subjectchlorine dioxide
dc.subjectpolyamide 66
dc.subjectchemical degradation
dc.subjectembrittlement
dc.titleMéthode de vieillissement accéléré au dioxyde de chlore
dc.title.alternativeAccelerated ageing method with chlorine dioxide. Application to additive free polyamide 66
dc.identifier.doi10.1051/tsm/201405063
dc.typdocArticle dans une revue avec comité de lecture
dc.localisationCentre de Paris
dc.subject.halChimie: Polymères
dc.subject.halSciences de l'ingénieur: Matériaux
dc.subject.halSciences de l'ingénieur: Mécanique
ensam.audienceInternationale
ensam.page63-75
ensam.journalTechniques Sciences Méthodes
ensam.volume5
hal.identifierhal-01063388
hal.version1
hal.statusaccept
dc.identifier.eissn2417-0097


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record