Show simple item record

dc.contributor.author
 hal.structure.identifier
FAGIANI, Ramona
31214 Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] [LaMCoS]
dc.contributor.author
 hal.structure.identifier
MASSI, Francesco
31214 Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] [LaMCoS]
dc.contributor.author
 hal.structure.identifier
CHATELET, Eric
31214 Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] [LaMCoS]
dc.contributor.author
 hal.structure.identifier
COSTES, Jean-Philippe
127742 Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]
dc.contributor.author
 hal.structure.identifier
BERTHIER, Yves
31214 Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] [LaMCoS]
dc.date.accessioned2014
dc.date.available2014
dc.date.issued2012
dc.date.submitted2014
dc.identifier.issn1023-8883
dc.identifier.urihttp://hdl.handle.net/10985/8982
dc.description.abstractThe tactile information about object surfaces is obtained through perceived contact stresses and frictioninduced vibrations generated by the relative motion between the fingertip and the touched object. The friction forces affect the skin stress-state distribution during surface scanning, while the sliding contact generates vibrations that propagate in the finger skin activating the receptors (mechanoreceptors) and allowing the brain to identify objects and perceive information about their properties. In this article, the friction coefficient between a real human finger and both rigid surfaces and fabrics is retrieved as a function of the contact parameters (load and scanning speed). Then, the analysis of the vibration spectra is carried out to investigate the features of the induced vibrations, measured on the fingernail, as a function of surface textures and contact parameters. While the friction coefficient measurements on rigid surfaces agree with empirical laws found in literature, the behaviour of the friction coefficient when touching a fabric is more complex, and is mainly the function of the textile constructional properties. Results show that frequency spectrum distribution, when touching a rigid surface, is mainly determined by the relative geometry of the two contact surfaces and by the contact parameters. On the contrary, when scanning a fabric, the structure and the deformation of the textile itself largely affect the spectrum of the induced vibration. Finally, some major features of the measured vibrations (frequency distribution and amplitude) are found to be representative of tactile perception compared to psychophysical and neurophysiologic works in literature.
dc.language.isoen
dc.publisherSpringer Verlag
dc.rightsPost-print
dc.subjectTactile perception
dc.subjectMechanoreceptors
dc.subjectTextiles
dc.subjectFriction induced vibrations
dc.subjectFriction coefficient
dc.titleContact of a Finger on Rigid Surfaces and Textiles: Friction Coefficient and Induced Vibrations
dc.identifier.doi10.1007/s11249-012-0010-0
dc.typdocArticle dans une revue avec comité de lecture
dc.localisationCentre de Cluny
dc.subject.halSciences de l'ingénieur: Mécanique: Génie mécanique
ensam.audienceInternationale
ensam.page1-16
ensam.journalTribology Letters
ensam.volume46
ensam.issue3
hal.identifierhal-01087044
hal.version1
hal.statusaccept
dc.identifier.eissn1573-2711


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record