Joint Stiffness Identification of a Heavy Kuka Robot with a Low-cost Clamped End-effector Procedure
dc.contributor.author
hal.structure.identifier | JUBIEN, Anthony
|
dc.contributor.author
hal.structure.identifier | ABBA, Gabriel
|
dc.contributor.author
hal.structure.identifier | GAUTIER, Maxime
|
dc.date.accessioned | 2014 |
dc.date.available | 2014 |
dc.date.issued | 2014 |
dc.date.submitted | 2014 |
dc.identifier.uri | http://hdl.handle.net/10985/8984 |
dc.description.abstract | This paper proposes two new methods for the identification of static stiffnesses of multi degrees of freedom heavy industrial robots. They are based on a locked link joint procedure obtained with an end-effector fixed to the environment. The first method requires only measurements of motor positions and motor torques data computed from motor current measurements and manufacturer's drive gains. The second one needs a torque sensor to measure the interaction wrench between the clamped end-effector and the environment. These methods are being experimentally validated and compared on the 2 first joints of a 6 degrees of freedom heavy 500Kg payload industrial Kuka KR500 robot. |
dc.description.sponsorship | ANR |
dc.language.iso | en |
dc.publisher | Springer/ Scitepress |
dc.rights | Post-print |
dc.subject | Stiffness |
dc.subject | Industrial Robot |
dc.subject | Identification |
dc.subject | Clamped End-effector |
dc.title | Joint Stiffness Identification of a Heavy Kuka Robot with a Low-cost Clamped End-effector Procedure |
dc.identifier.doi | 10.5220/0005115805850591 |
dc.typdoc | Communication avec acte |
dc.localisation | Centre de Metz |
dc.subject.hal | Sciences de l'ingénieur: Automatique / Robotique |
ensam.audience | Internationale |
ensam.conference.title | ICINCO 2014 - 11th International Conference on Informatics in Control, Automation and Robotics |
ensam.conference.date | 2014-09 |
ensam.country | Austria |
ensam.title.proceeding | Proceedings of ICINCO 2014 |
ensam.page | 585-591 |
ensam.volume | 2 |
ensam.city | Vienna |
hal.identifier | hal-01087021 |
hal.version | 1 |
hal.submission.permitted | updateFiles |
hal.status | accept |