Forging process control: Influence of key parameters variation on product specifications deviations
dc.contributor.author | ALLAM, Zakaria |
dc.contributor.author | BECKER, Eric |
dc.contributor.author
hal.structure.identifier | KRUMPIPE, Pierre
|
dc.contributor.author
hal.structure.identifier | BAUDOUIN, Cyrille
|
dc.contributor.author
hal.structure.identifier | BIGOT, Regis
|
dc.date.accessioned | 2014 |
dc.date.available | 2014 |
dc.date.issued | 2014 |
dc.date.submitted | 2014 |
dc.identifier.issn | 1877-7058 |
dc.identifier.uri | http://hdl.handle.net/10985/9095 |
dc.description.abstract | Process control in forging industry is essential to ensure a better quality of the product with a lower cost at the end of the manufacturing process. To control the process, a number of key parameters must be monitored to prevent product or forging plan deviations. This paper will illustrate how a variation in a process parameter can create product specifications deviations and how key parameters influence product final state. The illustration work is done on a part obtained via hot forging. An analysis is made on product parameters such as geometry, by varying the key process parameter values previously determined from a created methodology. This later is represented as a decision support system that connects product specifications (geometry, absence of defects…) or other forging specifications (tool wear, involved energy...) to the process parameters. |
dc.language.iso | en |
dc.publisher | Elsevier / Takashi Ishikawa and Ken-ichiro Mori |
dc.rights | Post-print |
dc.subject | Forging process |
dc.subject | Process control |
dc.subject | Hot forming |
dc.subject | Extrusion |
dc.title | Forging process control: Influence of key parameters variation on product specifications deviations |
dc.identifier.doi | 10.1016/j.proeng.2014.10.361 |
dc.typdoc | Communication avec acte |
dc.localisation | Centre de Metz |
dc.subject.hal | Sciences de l'ingénieur: Génie des procédés |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Génie mécanique |
ensam.audience | Internationale |
ensam.conference.title | 11th International Conference on Technology of Plasticity, ICTP 2014 |
ensam.conference.date | 2014-10 |
ensam.country | Japan |
ensam.title.proceeding | Procedia Engineering |
ensam.page | 2524-2529 |
ensam.volume | 81 |
ensam.city | Nagoya |
hal.identifier | hal-01094147 |
hal.version | 1 |
hal.status | accept |