Experimental & Numerical Study of the Hot Upsetting of Weld Cladded Billets
Communication avec acte
Abstract
The presented work is dedicated to studying the forgeability of bimaterial cladded billet. Hot upsetting tests of cylindrical low carbon steel (C15) billets weld cladded (MIG) by stainless steel (SS316L) are experimentally and numerically studied. Upsetting tests with different upsetting ratios are performed in different tribology conditions at 1050°C which is within the better forgeability temperature range of both substrate and cladding materials[ 1 ]. Slab model and finite-element simulation are conducted to parametrically study the potential forgeability of the bimaterial cladded billet. The viscoplastic law is adopted to model the friction at the die/billet interface. The friction condition at the die/billet interface has a great impact on the final material distribution, forging effort and cracking occurrence. With Latham and Cockcroft Criterion, the possibility and potential position of cracks could be predicted.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureWANG, Jingcai; LANGLOIS, Laurent; RAFIQ, Muhammad; LU, Hao (Elsevier, 2014)This paper focuses on the hot forging of multi-material cladded work pieces using upsetting tests. Thecase study corresponds to gas metal arc welding cladding of a SS316L on a mild steel (C15). Experimentaltests and ...
-
Communication avec acteRAFIQ, Muhammad; LANGLOIS, Laurent (American Institute of Physics, 2010)Weld cladding is employed to improve the service life of engineering components by increasing corrosion and wear resistance and reducing the cost. The acceptable multi-bead cladding layer depends on single bead geometry. ...
-
Article dans une revue avec comité de lectureJEMAL, Nejah; ZIMMER-CHEVRET, Sandra; LANGLOIS, Laurent; ABBA, Gabriel (Trans Tech Publications, 2013)Friction stir welding is known for his capability to achieve a linear weld. However, more investigation on a curved friction stir weld trajectory is still required to industrialize this promising process. In the same ...
-
Communication avec acteNGUYEN, Von Dim; MARTIN, Patrick; LANGLOIS, Laurent; CROUE, Jean-Baptiste (Springer, 2014)As a solution for traditional design process having many drawbacks in the manufacturing process, the integration of Product design-Process selection-Process planning is carried out in the early design phase. The technological, ...
-
Rapport de rechercheZIMMER-CHEVRET, Sandra; LANGLOIS, Laurent; BEN ATTAR, Amarilys (ABBA Gabriel, 2014)Ce document traite de la modélisation des actions mécaniques entre l’outil et la matière. L’objectif est de définir un modèle exploitable pour la définition de la commande du robot. Dans un premier temps, le rapport présente ...