A multilayer model for describing hardness variations of aged porous silicon low-dielectric-constant thin films
dc.contributor.author
hal.structure.identifier | RAHMOUN, Khadidja
|
dc.contributor.author | IOST, Alain |
dc.contributor.author | KERYVIN, Vincent |
dc.contributor.author | GUILLEMOT, Gildas |
dc.contributor.author
hal.structure.identifier | CHABANE, Sari
|
dc.date.accessioned | 2015 |
dc.date.available | 2015 |
dc.date.issued | 2009 |
dc.date.submitted | 2015 |
dc.identifier.issn | 0040-6090 |
dc.identifier.uri | http://hdl.handle.net/10985/9696 |
dc.description | One of the authors (K.R.) wants to thank Pr. Lazhar Haji for her proposal of a research stay at Laboratoire d'Optronique, CNRS-UMR FOTON 6082, Université de Rennes 1, France. The authors also wish to thank Dr. M. Gendouz (Laboratoire d'Optronique, CNRS-UMR FOTON 6082, Université de Rennes 1), J. Le Lannic (CMEBA, Université de Rennes 1), Pr. C. Mathieu (CCML Université d'Artois, Faculté Jean Perrin de Lens, France), and V. Hague (ENSAM Lille, France) respectively for their help with sample preparation, HR SEM or SEM observations and assistance as regards English. |
dc.description.abstract | This paper reports on the micro-instrumented indentation of a porous silicon structure obtained by anodization of a highly p+-doped (100) silicon substrate aged over 1 week. The three-layer structure obtained consists of oxidized porous silicon (cap-layer), porous silicon (inner-layer) and silicon substrate. The hardness curve has the typical “U shape” of low-dielectric-constant films when the indentation depth rises: the early decrease in hardness, due to the soft inner layer, is followed by an increase, due to the hard substrate. A multilayer model is developed to account for hardness variation with respect to the applied load. This model considers the crumbling of the cap-layer and of the inner porous structure. As a result, it is shown that considering the minima in the U shape gives an over-estimated value when it comes to assessing the coating hardness. In our experiment, this minimum depends on both the hardness and the thickness of the oxidized cap layer, but not on the mechanical properties of the substrate, even for indentation depths slightly lower than the film's thickness. |
dc.language.iso | en |
dc.publisher | ELSEVIER |
dc.rights | Post-print |
dc.subject | Instrumented-indentation testing |
dc.subject | Composite hardness modelling |
dc.subject | Porous Si film |
dc.subject | Low-k dielectric thin film |
dc.subject | Martens hardness |
dc.title | A multilayer model for describing hardness variations of aged porous silicon low-dielectric-constant thin films |
dc.identifier.doi | 10.1016/j.tsf.2009.07.040 |
dc.typdoc | Article dans une revue avec comité de lecture |
dc.localisation | Centre de Lille |
dc.subject.hal | Sciences de l'ingénieur: Electronique |
dc.subject.hal | Sciences de l'ingénieur: Matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Mécanique des matériaux |
ensam.audience | Internationale |
ensam.page | 213-221 |
ensam.journal | Thin Solid Films |
ensam.volume | 518 |
ensam.issue | 1 |
hal.identifier | hal-01170940 |
hal.version | 1 |
hal.status | accept |