Wear performance of duplex treated low alloyed steel against wood (beech) as static partner
dc.contributor.author | BELIARDOUH, Nasser Eddine |
dc.contributor.author | KALELI, Hakan |
dc.contributor.author
hal.structure.identifier | NOUVEAU, Corinne
|
dc.date.accessioned | 2015 |
dc.date.available | 2015 |
dc.date.issued | 2014 |
dc.date.submitted | 2015 |
dc.identifier.issn | 1310-4772 |
dc.identifier.uri | http://hdl.handle.net/10985/9990 |
dc.description.abstract | The sliding tribological behaviour of Cr-(WC-Co) coating against wood (beech) as counterpart was investigated using a duplex treatment of low carbon steel(DIN 18CrMo4). The duplex treatment consists of LPC (low pressure carburising) + R.F magnetron co-sputtering of Cr and WC-Co. Pin-on-disk configurations in dry condition wear tests were performed. The wear scars of the coatings were evaluated using optical profilometry, scanning electron microscopy (SEM/EDS) and the wear mechanisms were consequently discussed. The aim of this work is to study wear mechanisms on the wood pin/disc couple. It was concluded that best behaviour was observed in the case of higher Cr content coating. |
dc.language.iso | en |
dc.publisher | Scientific Bulgarian Communications Ltd |
dc.rights | Post-print |
dc.subject | Duplex treatment |
dc.subject | Wear |
dc.subject | Wood |
dc.subject | Cr-(WC-Co) |
dc.title | Wear performance of duplex treated low alloyed steel against wood (beech) as static partner |
dc.typdoc | Article dans une revue avec comité de lecture |
dc.localisation | Centre de Cluny |
dc.subject.hal | Physique: matière Condensée: Science des matériaux |
dc.subject.hal | Sciences de l'ingénieur: Matériaux |
dc.subject.hal | Sciences de l'ingénieur: Mécanique |
ensam.audience | Internationale |
ensam.page | 84-92 |
ensam.journal | Journal of the Balkan Tribological Association |
ensam.volume | 20 |
ensam.issue | 1 |
hal.identifier | hal-01197266 |
hal.version | 1 |
hal.status | accept |