SAM
https://sam.ensam.eu:443
The DSpace digital repository system captures, stores, indexes, preserves, and distributes digital research material.Wed, 06 Dec 2023 06:54:38 GMT2023-12-06T06:54:38ZPGD-Based Computational Vademecum for Efficient Design, Optimization and Control
http://hdl.handle.net/10985/10241
PGD-Based Computational Vademecum for Efficient Design, Optimization and Control
CHINESTA, Francisco; LEYGUE, Adrien; BORDEU, Felipe; AGUADO, Jose Vicente; CUETO, Elias; GONZALEZ, David; ALFARO, Iciar; AMMAR, Amine; HUERTA, Antonio
In this paper we are addressing a new paradigm in the field of simulation-based engineering sciences (SBES) to face the challenges posed by current ICT technologies. Despite the impressive progress attained by simulation capabilities and techniques, some challenging problems remain today intractable. These problems, that are common to many branches of science and engineering, are of different nature. Among them, we can cite those related to high-dimensional problems, which do not admit mesh-based approaches due to the exponential increase of degrees of freedom. We developed in recent years a novel technique, called Proper Generalized Decomposition (PGD). It is based on the assumption of a separated form of the unknown field and it has demonstrated its capabilities in dealing with high-dimensional problems overcoming the strong limitations of classical approaches. But the main opportunity given by this technique is that it allows for a completely new approach for classic problems, not necessarily high dimensional. Many challenging problems can be efficiently cast into a multidimensional framework and this opens new possibilities to solve old and new problems with strategies not envisioned until now. For instance, parameters in a model can be set as additional extra-coordinates of the model. In a PGD framework, the resulting model is solved once for life, in order to obtain a general solution that includes all the solutions for every possible value of the parameters, that is, a sort of computational vademecum. Under this rationale, optimization of complex problems, uncertainty quantification, simulation-based control and real-time simulation are now at hand, even in highly complex scenarios, by combining an off-line stage in which the general PGD solution, the vademecum, is computed, and an on-line phase in which, even on deployed, handheld, platforms such as smartphones or tablets, real-time response is obtained as a result of our queries.
Tue, 01 Jan 2013 00:00:00 GMThttp://hdl.handle.net/10985/102412013-01-01T00:00:00ZCHINESTA, FranciscoLEYGUE, AdrienBORDEU, FelipeAGUADO, Jose VicenteCUETO, EliasGONZALEZ, DavidALFARO, IciarAMMAR, AmineHUERTA, AntonioIn this paper we are addressing a new paradigm in the field of simulation-based engineering sciences (SBES) to face the challenges posed by current ICT technologies. Despite the impressive progress attained by simulation capabilities and techniques, some challenging problems remain today intractable. These problems, that are common to many branches of science and engineering, are of different nature. Among them, we can cite those related to high-dimensional problems, which do not admit mesh-based approaches due to the exponential increase of degrees of freedom. We developed in recent years a novel technique, called Proper Generalized Decomposition (PGD). It is based on the assumption of a separated form of the unknown field and it has demonstrated its capabilities in dealing with high-dimensional problems overcoming the strong limitations of classical approaches. But the main opportunity given by this technique is that it allows for a completely new approach for classic problems, not necessarily high dimensional. Many challenging problems can be efficiently cast into a multidimensional framework and this opens new possibilities to solve old and new problems with strategies not envisioned until now. For instance, parameters in a model can be set as additional extra-coordinates of the model. In a PGD framework, the resulting model is solved once for life, in order to obtain a general solution that includes all the solutions for every possible value of the parameters, that is, a sort of computational vademecum. Under this rationale, optimization of complex problems, uncertainty quantification, simulation-based control and real-time simulation are now at hand, even in highly complex scenarios, by combining an off-line stage in which the general PGD solution, the vademecum, is computed, and an on-line phase in which, even on deployed, handheld, platforms such as smartphones or tablets, real-time response is obtained as a result of our queries.Physically sound, self-learning digital twins for sloshing fluids
http://hdl.handle.net/10985/18975
Physically sound, self-learning digital twins for sloshing fluids
MOYA, Beatriz; ALFARO, Iciar; GONZALEZ, David; CHINESTA, Francisco; CUETO, Elías
In this paper, a novel self-learning digital twin strategy is developed for fluid sloshing phenomena. This class of problems is of utmost importance for robotic manipulation of fluids, for instance, or, in general, in simulation-assisted decision making. The proposed method infers the (linear or non-linear) constitutive behavior of the fluid from video sequences of the sloshing phenomena. Real-time prediction of the fluid response is obtained from a reduced order model (ROM) constructed by means of thermodynamics-informed data-driven learning. From these data, we aim to predict the future response of a twin fluid reacting to the movement of the real container. The constructed system is able to perform accurate forecasts of its future reactions to the movements of the containers. The system is completed with augmented reality techniques, so as to enable comparisons among the predicted result with the actual response of the same liquid and to provide the user with insightful information about the physics taking place.
Wed, 01 Jan 2020 00:00:00 GMThttp://hdl.handle.net/10985/189752020-01-01T00:00:00ZMOYA, BeatrizALFARO, IciarGONZALEZ, DavidCHINESTA, FranciscoCUETO, ElíasIn this paper, a novel self-learning digital twin strategy is developed for fluid sloshing phenomena. This class of problems is of utmost importance for robotic manipulation of fluids, for instance, or, in general, in simulation-assisted decision making. The proposed method infers the (linear or non-linear) constitutive behavior of the fluid from video sequences of the sloshing phenomena. Real-time prediction of the fluid response is obtained from a reduced order model (ROM) constructed by means of thermodynamics-informed data-driven learning. From these data, we aim to predict the future response of a twin fluid reacting to the movement of the real container. The constructed system is able to perform accurate forecasts of its future reactions to the movements of the containers. The system is completed with augmented reality techniques, so as to enable comparisons among the predicted result with the actual response of the same liquid and to provide the user with insightful information about the physics taking place.Data-driven GENERIC modeling of poroviscoelastic materials
http://hdl.handle.net/10985/18480
Data-driven GENERIC modeling of poroviscoelastic materials
GHNATIOS, Chady; ALFARO, Iciar; GONZÁLEZ, David; CHINESTA, Francisco; CUETO, Elías G.
Biphasic soft materials are challenging to model by nature. Ongoing efforts are targeting their effective modeling and simulation. This work uses experimental atomic force nanoindentation of thick hydrogels to identify the indentation forces are a function of the indentation depth. Later on, the atomic force microscopy results are used in a GENERIC general equation for non-equilibrium reversible-irreversible coupling (GENERIC) formalism to identify the best model conserving basic thermodynamic laws. The data-driven GENERIC analysis identifies the material behavior with high fidelity for both data fitting and prediction.
Tue, 01 Jan 2019 00:00:00 GMThttp://hdl.handle.net/10985/184802019-01-01T00:00:00ZGHNATIOS, ChadyALFARO, IciarGONZÁLEZ, DavidCHINESTA, FranciscoCUETO, Elías G.Biphasic soft materials are challenging to model by nature. Ongoing efforts are targeting their effective modeling and simulation. This work uses experimental atomic force nanoindentation of thick hydrogels to identify the indentation forces are a function of the indentation depth. Later on, the atomic force microscopy results are used in a GENERIC general equation for non-equilibrium reversible-irreversible coupling (GENERIC) formalism to identify the best model conserving basic thermodynamic laws. The data-driven GENERIC analysis identifies the material behavior with high fidelity for both data fitting and prediction.Real‐time interaction of virtual and physical objects in mixed reality applications
http://hdl.handle.net/10985/19295
Real‐time interaction of virtual and physical objects in mixed reality applications
BADÍAS, Alberto; GONZÁLEZ, David; ALFARO, Iciar; CHINESTA, Francisco; CUETO, Elías
We present a real-time method for computing the mechanical interaction between real and virtual objects in an augmented reality environment. Using model order reduction methods we are able to estimate the physical behavior of deformable objects in real time, with the precision of a high-fidelity solver but working at the speed of a video sequence. We merge tools of machine learning, computer vision, and computer graphics in a single application to describe the behavior of deformable virtual objects allowing the user to interact with them in a natural way. Three examples are provided to test the performance of the method.
Wed, 01 Jan 2020 00:00:00 GMThttp://hdl.handle.net/10985/192952020-01-01T00:00:00ZBADÍAS, AlbertoGONZÁLEZ, DavidALFARO, IciarCHINESTA, FranciscoCUETO, ElíasWe present a real-time method for computing the mechanical interaction between real and virtual objects in an augmented reality environment. Using model order reduction methods we are able to estimate the physical behavior of deformable objects in real time, with the precision of a high-fidelity solver but working at the speed of a video sequence. We merge tools of machine learning, computer vision, and computer graphics in a single application to describe the behavior of deformable virtual objects allowing the user to interact with them in a natural way. Three examples are provided to test the performance of the method.Learning slosh dynamics by means of data
http://hdl.handle.net/10985/17933
Learning slosh dynamics by means of data
MOYA, Beatriz; GONZÁLEZ, David; ALFARO, Iciar; CHINESTA, Francisco; CUETO, Elías G.
In this work we study several learning strategies for fluid sloshing problems based on data. In essence, a reduced-order model of the dynamics of the free surface motion of the fluid is developed under rigorous thermodynamics settings. This model is extracted from data by exploring several strategies. First, a linear one, based on the employ of Proper Orthogonal Decomposition techniques is analyzed. Second, a strategy based on the employ of Locally Linear Embedding is studied. Finally, Topological Data Analysis is employed to the same end. All the three distinct possibilities rely on a numerical integration scheme to advance the dynamics in time. This thermodynamically consistent integrator is developed on the basis of the General Equation for Non-Equilibrium Reversible–Irreversible Coupling, GENERIC [M. Grmela and H.C Oettinger (1997). Phys. Rev. E. 56 (6): 6620–6632], framework so as to guarantee the satisfaction of first principles (particularly, the laws of thermodynamics). We show how the resulting method employs a few degrees of freedom, while it allows for a realistic reconstruction of the fluid dynamics of sloshing processes under severe real-time constraints. The proposed method is shown to run faster than real time in a standard laptop.
Tue, 01 Jan 2019 00:00:00 GMThttp://hdl.handle.net/10985/179332019-01-01T00:00:00ZMOYA, BeatrizGONZÁLEZ, DavidALFARO, IciarCHINESTA, FranciscoCUETO, Elías G.In this work we study several learning strategies for fluid sloshing problems based on data. In essence, a reduced-order model of the dynamics of the free surface motion of the fluid is developed under rigorous thermodynamics settings. This model is extracted from data by exploring several strategies. First, a linear one, based on the employ of Proper Orthogonal Decomposition techniques is analyzed. Second, a strategy based on the employ of Locally Linear Embedding is studied. Finally, Topological Data Analysis is employed to the same end. All the three distinct possibilities rely on a numerical integration scheme to advance the dynamics in time. This thermodynamically consistent integrator is developed on the basis of the General Equation for Non-Equilibrium Reversible–Irreversible Coupling, GENERIC [M. Grmela and H.C Oettinger (1997). Phys. Rev. E. 56 (6): 6620–6632], framework so as to guarantee the satisfaction of first principles (particularly, the laws of thermodynamics). We show how the resulting method employs a few degrees of freedom, while it allows for a realistic reconstruction of the fluid dynamics of sloshing processes under severe real-time constraints. The proposed method is shown to run faster than real time in a standard laptop.Real-time in silico experiments on gene regulatory networks and surgery simulation on handheld devices
http://hdl.handle.net/10985/10254
Real-time in silico experiments on gene regulatory networks and surgery simulation on handheld devices
ALFARO, Iciar; GONZALEZ, David; BORDEU, Felipe; LEYGUE, Adrien; AMMAR, Amine; CUETO, Elias; CHINESTA, Francisco
Simulation of all phenomena taking place in a surgical procedure is a formidable task that involves, when possible, the use of supercomputing facilities over long time periods. However, decision taking in the operating room needs for fast methods that provide an accurate response in real time. To this end, Model Order Reduction (MOR) techniques have emerged recently in the field of Computational Surgery to help alleviate this burden. In this paper, we review the basics of classical MOR and explain how a technique recently developed by the authors and coined as Proper Generalized Decomposition could make real-time feedback available with the use of simple devices like smartphones or tablets. Examples are given on the performance of the technique for problems at different scales of the surgical procedure, form gene regulatory networks to macroscopic soft tissue deformation and cutting.
Wed, 01 Jan 2014 00:00:00 GMThttp://hdl.handle.net/10985/102542014-01-01T00:00:00ZALFARO, IciarGONZALEZ, DavidBORDEU, FelipeLEYGUE, AdrienAMMAR, AmineCUETO, EliasCHINESTA, FranciscoSimulation of all phenomena taking place in a surgical procedure is a formidable task that involves, when possible, the use of supercomputing facilities over long time periods. However, decision taking in the operating room needs for fast methods that provide an accurate response in real time. To this end, Model Order Reduction (MOR) techniques have emerged recently in the field of Computational Surgery to help alleviate this burden. In this paper, we review the basics of classical MOR and explain how a technique recently developed by the authors and coined as Proper Generalized Decomposition could make real-time feedback available with the use of simple devices like smartphones or tablets. Examples are given on the performance of the technique for problems at different scales of the surgical procedure, form gene regulatory networks to macroscopic soft tissue deformation and cutting.Reduced order modeling for physically-based augmented reality
http://hdl.handle.net/10985/13809
Reduced order modeling for physically-based augmented reality
BADIAS, Alberto; ALFARO, Iciar; GONZALEZ, David; CHINESTA, Francisco; CUETO, Elias
In this work we explore the possibilities of reduced order modeling for augmented reality applications. We consider parametric reduced order models based upon separate (affine) parametric dependence so as to speedup the associated data assimilation problems, which involve in a natural manner the minimization of a distance functional. The employ of reduced order methods allows for an important reduction in computational cost, thus allowing to comply with the stringent real time constraints of video streams, i.e., around 30 Hz. Examples are included that show the potential of the proposed technique in different situations.
Mon, 01 Jan 2018 00:00:00 GMThttp://hdl.handle.net/10985/138092018-01-01T00:00:00ZBADIAS, AlbertoALFARO, IciarGONZALEZ, DavidCHINESTA, FranciscoCUETO, EliasIn this work we explore the possibilities of reduced order modeling for augmented reality applications. We consider parametric reduced order models based upon separate (affine) parametric dependence so as to speedup the associated data assimilation problems, which involve in a natural manner the minimization of a distance functional. The employ of reduced order methods allows for an important reduction in computational cost, thus allowing to comply with the stringent real time constraints of video streams, i.e., around 30 Hz. Examples are included that show the potential of the proposed technique in different situations.An augmented reality platform for interactive aerodynamic design and analysis
http://hdl.handle.net/10985/17947
An augmented reality platform for interactive aerodynamic design and analysis
BADÍAS, Alberto; CURTIT, Sarah; GONZÁLEZ, David; ALFARO, Iciar; CHINESTA, Francisco; CUETO, Elías G.
While modern CFD tools are able to provide the user with reliable and accurate simulations, there is a strong need for interactive design and analysis tools. State-of-the-art CFD software employs massive resources in terms of CPU time, user interaction, and also GPU time for rendering and analysis. In this work, we develop an innovative tool able to provide a seamless bridge between artistic design and engineering analysis. This platform has three main ingredients: computer vision to avoid long user interaction at the pre-processing stage, machine learning to avoid costly CFD simulations, and augmented reality for an agile and interactive post-processing of the results.
Tue, 01 Jan 2019 00:00:00 GMThttp://hdl.handle.net/10985/179472019-01-01T00:00:00ZBADÍAS, AlbertoCURTIT, SarahGONZÁLEZ, DavidALFARO, IciarCHINESTA, FranciscoCUETO, Elías G.While modern CFD tools are able to provide the user with reliable and accurate simulations, there is a strong need for interactive design and analysis tools. State-of-the-art CFD software employs massive resources in terms of CPU time, user interaction, and also GPU time for rendering and analysis. In this work, we develop an innovative tool able to provide a seamless bridge between artistic design and engineering analysis. This platform has three main ingredients: computer vision to avoid long user interaction at the pre-processing stage, machine learning to avoid costly CFD simulations, and augmented reality for an agile and interactive post-processing of the results.MORPH-DSLAM: Model Order Reduction for Physics-Based Deformable SLAM
http://hdl.handle.net/10985/23641
MORPH-DSLAM: Model Order Reduction for Physics-Based Deformable SLAM
BADIAS, Alberto; ALFARO, Iciar; GONZALEZ, David; CHINESTA, Francisco; CUETO, Elias
We propose a new methodology to estimate the 3D displacement field of deformable objects from video sequences using standard monocular cameras. We solve in real time the complete (possibly visco-)hyperelasticity problem to properly describe the strain and stress fields that are consistent with the displacements captured by the images, constrained by real physics. We do not impose any ad-hoc prior or energy minimization in the external surface, since the real and complete mechanics problem is solved. This means that we can also estimate the internal state of the objects, even in occluded areas, just by observing the external surface and the knowledge of material properties and geometry. Solving this problem in real time using a realistic constitutive law, usually non-linear, is out of reach for current systems. To overcome this difficulty, we solve off-line a parametrized problem that considers each source of variability in the problem as a new parameter and, consequently, as a new dimension in the formulation. Model Order Reduction methods allow us to reduce the dimensionality of the problem, and therefore, its computational cost, while preserving the visualization of the solution in the high-dimensionality space. This allows an accurate estimation of the object deformations, improving also the robustness in the 3D points estimation.
Tue, 01 Nov 2022 00:00:00 GMThttp://hdl.handle.net/10985/236412022-11-01T00:00:00ZBADIAS, AlbertoALFARO, IciarGONZALEZ, DavidCHINESTA, FranciscoCUETO, EliasWe propose a new methodology to estimate the 3D displacement field of deformable objects from video sequences using standard monocular cameras. We solve in real time the complete (possibly visco-)hyperelasticity problem to properly describe the strain and stress fields that are consistent with the displacements captured by the images, constrained by real physics. We do not impose any ad-hoc prior or energy minimization in the external surface, since the real and complete mechanics problem is solved. This means that we can also estimate the internal state of the objects, even in occluded areas, just by observing the external surface and the knowledge of material properties and geometry. Solving this problem in real time using a realistic constitutive law, usually non-linear, is out of reach for current systems. To overcome this difficulty, we solve off-line a parametrized problem that considers each source of variability in the problem as a new parameter and, consequently, as a new dimension in the formulation. Model Order Reduction methods allow us to reduce the dimensionality of the problem, and therefore, its computational cost, while preserving the visualization of the solution in the high-dimensionality space. This allows an accurate estimation of the object deformations, improving also the robustness in the 3D points estimation.