Afficher la notice abrégée

dc.contributor.author
 hal.structure.identifier
NICOLI, Cécile
127742 Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]
233808 ECAM Lyon [ECAM Lyon]
dc.contributor.authorCARTON, Jean-François
dc.contributor.author
 hal.structure.identifier
VAUCHERET, Alexis
127742 Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]
233808 ECAM Lyon [ECAM Lyon]
dc.contributor.author
 hal.structure.identifier
JACQUET, Philippe
127742 Laboratoire Bourguignon des Matériaux et Procédés [LABOMAP]
233808 ECAM Lyon [ECAM Lyon]
dc.date.accessioned2018
dc.date.available2018
dc.date.issued2018
dc.date.submitted2018
dc.identifier.issn2543-9901
dc.identifier.urihttp://hdl.handle.net/10985/13355
dc.description.abstractDeoxidation is an unavoidable step in the elaboration of steel. The study of its influence could improve the quality of low-carbon steel (0.20–0.25 wt.% of carbon). There are many deoxidation methods, and the most-common one consists of adding aluminum. Although it is a classic method, determining the optimal process parameters (quantity, yield, etc.…) could be very sensitive. Deoxidation plays a determining role on inclusion cleanliness, especially on sulfide morphology. In order to control the efficiency of deoxidation, different techniques can be used. In this paper, an automated counting procedure on a scanning electron microscope with a field emission gun (FEG-SEM) is presented. This method was applied on samples cast in our laboratory under different deoxidation conditions. According to this, the resulting inclusion population is correlated with the aluminum content to find the optimal process parameters.
dc.language.isoen
dc.publisherAGH University of Science and Technology Press, AGH-UST, 30 Mickiewicza Av., 30-059 Krakow
dc.rightsPost-print
dc.subjectSulfide morphology, Deoxidation, Non-metallic inclusions, Low carbon steel, SEM- FEG
dc.titleDeoxidation Impact on Non-Metallic Inclusions and Characterization Methods
dc.identifier.doi10.7494/jcme.2017.1.4.97
dc.typdocArticle dans une revue avec comité de lecture
dc.localisationCentre de Cluny
dc.subject.halChimie: Matériaux
dc.subject.halSciences de l'ingénieur: Matériaux
ensam.audienceInternationale
ensam.page97-102
ensam.journalJournal of casting and materials engineering
ensam.volume1
ensam.issue4
ensam.peerReviewingOui
hal.statusunsent


Fichier(s) constituant cette publication

Thumbnail

Cette publication figure dans le(les) laboratoire(s) suivant(s)

Afficher la notice abrégée