Effect of thread milling penetration strategies on the dimensional accuracy
dc.contributor.author | SHARMA, Vishal |
dc.contributor.author | PAIRE, Yann |
dc.contributor.author | BRENDLEN, Romain |
dc.contributor.author
hal.structure.identifier | FROMENTIN, Guillaume
|
dc.contributor.author | POULACHON, Gerard |
dc.date.accessioned | 2013 |
dc.date.available | 2017 |
dc.date.issued | 2011 |
dc.date.submitted | 2013 |
dc.identifier.issn | 1087-1357 |
dc.identifier.uri | http://hdl.handle.net/10985/7463 |
dc.description.abstract | Day by day the application of thread milling process is enhancing in industry because of its inherent advantages over other thread cutting techniques. The current study dwells on the interference issue, which is generated during thread milling. It was observed that there are two sources of interference on the thread produced i.e interference induced during mill penetration and during full machining. This interference leads to an overcut on the thread, thus it produces dimensionally inaccurate thread. The interference produced by penetration is much more as compared to interference generated during full machining of thread. Thus, there is a pressing need to analyze interference during penetration. So this study evaluates different applied penetration strategies and the level of interference produced. Further, the study suggests modified penetration strategies in order to reduce the interference produced and hence create more accurate thread. This investigation is supported by analytical modeling and experimental exploration. |
dc.description.sponsorship | Postdoc financé par Conseil Régional de Bourgogone Collaboration avec l'entreprise WALTER PROTOTYP |
dc.language.iso | en_US |
dc.publisher | American Society of Mechanical Engineers |
dc.rights | Post-print |
dc.subject | Thread milling |
dc.subject | Dimensional accuracy |
dc.subject | Interference |
dc.subject | Penetration strategies |
dc.title | Effect of thread milling penetration strategies on the dimensional accuracy |
ensam.embargo.terms | 10 Years |
dc.identifier.doi | 10.1115/1.4004318 |
dc.typdoc | Article dans une revue avec comité de lecture |
dc.localisation | Centre de Cluny |
dc.subject.hal | Sciences de l'ingénieur: Mécanique: Génie mécanique |
ensam.audience | Non spécifiée |
ensam.page | 1-13 |
ensam.journal | Journal of Manufacturing Science and Engineering |
ensam.volume | 133 |
ensam.issue | 4 |
hal.status | unsent |