Effect of thread milling penetration strategies on the dimensional accuracy
Article dans une revue avec comité de lecture
Date
2011Journal
Journal of Manufacturing Science and EngineeringRésumé
Day by day the application of thread milling process is enhancing in industry because of its inherent advantages over other thread cutting techniques. The current study dwells on the interference issue, which is generated during thread milling. It was observed that there are two sources of interference on the thread produced i.e interference induced during mill penetration and during full machining. This interference leads to an overcut on the thread, thus it produces dimensionally inaccurate thread. The interference produced by penetration is much more as compared to interference generated during full machining of thread. Thus, there is a pressing need to analyze interference during penetration. So this study evaluates different applied penetration strategies and the level of interference produced. Further, the study suggests modified penetration strategies in order to reduce the interference produced and hence create more accurate thread. This investigation is supported by analytical modeling and experimental exploration.
Fichier(s) constituant cette publication
- Nom:
- LABOMAP_ASME_JMSE_FROMENTIN_20 ...
- Taille:
- 1.075Mo
- Format:
- Description:
- article principal
- Fin d'embargo:
- 2017-11-08
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureThe application of thread milling is increasing in industry because of its inherent advantages over other thread cutting techniques. The objective of this study is to investigate the effect of milling cutter tool geometry ...
-
Article dans une revue avec comité de lectureDENGUIR, Lamice; BESNARD, Aurélien; FROMENTIN, Guillaume; POULACHON, Gérard; ZHU, Xiaowen (Taylor & Francis, 2014)One of the criteria mastering the choice of a cutting tool is its wear resistance. In this paper, tool life is treated: on one hand, the study aims to classify the performances of the edge preparations in terms of ...
-
Article dans une revue avec comité de lectureLEGRAND, Côme; FROMENTIN, Guillaume; POULACHON, Gerard; RANCIC, Mickael (Springer Science and Business Media LLC, 2022-09-28)Burr size is a real issue in aeronautic for machining highly critical parts, such as broaching of turbine disks, it may affect the mechanical resistance of the part. However, the analysis and modelling of the burr formation ...
-
Article dans une revue avec comité de lectureCAMPOCASSO, Sébastien; COSTES, Jean-Philippe; BISSEY BRETON, Stéphanie; FROMENTIN, Guillaume; POULACHON, Gerard (Elsevier, 2015)The knowledge of cutting forces is of prime importance to ensure the success of cutting operations, the desired properties of the machined parts and therefore the functionality of the workpieces. Edge discretisation is one ...
-
Article dans une revue avec comité de lectureThis paper presents the results of a study of lubrication in form tapping and aims at a better understanding of its effect. It appears that lubrication is of paramount importance. Oil with efficient high pressure additives ...