Nano- and micro-scale morghological defects in oxidized a-SiC: H thin films
Article dans une revue avec comité de lecture
Date
2013Journal
physica status solidi (c)Résumé
Amorphous carbon rich a-SiC:H films were deposited on silicon substrates by RF-magnetron sputtering of SiC target in argon/methane gas mixture. The principal focus of this study was investigation of the effect of thermal oxidation on structure and morphology reconstruction in a-SiC:H amorphous network. The density of the films was varied over the range 1.6-2.2 g/cm2 by varying the magnetron discharge power. The local nano- and micro-scale surface morphology and chemical composition distribution were examined by atomic force microscopy, scanning electron microscopy equipped with Auger electron scanning system and optical profilometry. It was found that partial oxidation leads to local structure reconstruction accompanied by transformation of mechanical stresses from compressive to tensile. Formation of carbon-enriched nano- and micro-scale regions was observed after oxidation in low density samples. We attrribute these morphological defects to migration and precipitation of carbon species released in the process of oxidation of the SiC amorphous network. The mechanism of tensile stresses generation is also discussed.
Fichier(s) constituant cette publication
- Nom:
- LABOMAP_PSSc_2013_NOUVEAU.pdf
- Taille:
- 661.6Ko
- Format:
- Fin d'embargo:
- 2017-01-01
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureLABIDI, Chafik; FERREIRA-MARTIN, Jean-Pierre; DJOUADI, Mohamed Abdou; NOUVEAU, Corinne; COLLET, Robert (Elsevier, 2007)This study deals with the development of Chromium Aluminium Nitride (CrAlN) hard coatings (by varying the nitrogen content in the plasma, the target bias voltage, the working pressure and the deposition time) and their ...
-
Article dans une revue avec comité de lectureCHALA, Abdelouahad; DJOUADI, Mohamed Abdou; STEYER, Philippe; MILLET, Jean-Pierre; SAIED, Chahinez; AIDA, Mohammed Salah; LAMBERTIN, Michel; NOUVEAU, Corinne (Elsevier, 2006)This paper presents corrosion behaviour of duplex treated low alloy steel. Different kinds of samples were tested: non-treated, plasma nitrided, ZrBN-triode sputtered and ZrBN-duplex treated samples. The corrosion behaviour ...
-
Article dans une revue avec comité de lectureNowadays, most surface treatments are realized through vapor deposition techniques as thin hard coatings to guarantee; high surface hardness, low friction coefficient and improve wear resistance. Several experimental ...
-
Article dans une revue avec comité de lectureWALOCK, Michael J.; RAHIL, Issam; ZOU, Yujiao; IMHOFF, Luc; CATLEDGE, Shane Aaron; STANISHEVSKY, Andrei; NOUVEAU, Corinne (American Scientific Publishers, 2012)Many of today’s demanding applications require thin-film coatings with high hardness, toughness, and thermal stability. In many cases, coating thickness in the range 2–20 m and low surface roughness are required. Diamond ...
-
Article dans une revue avec comité de lectureBENLATRECHE, Yacine; RAHIL, Issam; MARCHAL, Rémy; CHEKOUR, Lounis; NOUVEAU, Corinne (Wiley-VCH Verlag, 2009)Recently, several studies have shown that the addition of a secondary element likes Al, Si, etc. to nitride and carbide binary systems such as Ti–N and Cr–N improved their structural and mechanical properties and also their ...