Numerical simulation of workpiece thermal field in drilling CFRP/Aluminum alloy
Article dans une revue avec comité de lecture
Author
MONTOYA, Maxime 
CALAMAZ, MadalinaGEHIN, Daniel GIROT, FranckAbstract
Temperature reached at the tool/workpiece interface is difficult to measure during drilling operation, due to its enclosed configuration; numerical simulation is therefore a good alternative to access to this information. The purpose of this study is to develop and carry out numerical simulations in order to estimate the workpiece thermal field generated during drilling. The simulations are validated by comparing simulated and measured temperatures at 4 mm from the holes wall. This method is applied to evaluate thermal field generated during drilling (with chip removing cycles) of CFRP/Aluminum alloy stacks. The influence of the drilling kinematics on the workpiece thermal field is also investigated.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lecture;CALAMAZ, Madalina; ; GIROT, Franck (Springer Verlag, 2013)
This paper aims to establish the wear mechanisms of coated and uncoated tungsten carbide drills when drilling carbon fibre reinforced plastics (CFRP)/aluminium alloy (Al) stacks. During the drilling experiments, thrust ...
-
Cutting Forces Parametric Model for the Dry High Speed Contour Milling of Aerospace Aluminium Alloys Article dans une revue avec comité de lecture; ;CALAMAZ, Madalina; GIROT, Franck; (Elsevier, 2013)
Cutting forces is one of the most important outputs in material removal machining processes. Their values depend on a large number of parameters, such as the cutting tool material and geometry, the workpiece material or ...
-
Article dans une revue avec comité de lectureCALAMAZ, Madalina; COUPARD, Dominique; GIROT, Franck (Taylor & Francis, 2010)
In this study, the commercial finite element software FORGE2005, able to solve complex thermo-mechanical problems is used to model titanium alloy dry machining. One of the main machining characteristics of titanium alloys ...
-
Article dans une revue avec comité de lectureCALAMAZ, Madalina; ; ; ; COUPARD, Dominique; ; GIROT, Franck; (Elsevier, 2009)
The aim of this study is to improve the general understanding of tungsten carbide (WC–Co) tool wear under dry machining of the hard-to-cut titanium alloy Ti6Al4V. The chosen approach includes experimental and numerical ...
-
Article dans une revue avec comité de lectureCALAMAZ, Madalina; COUPARD, Dominique; GIROT, Franck (Elsevier, 2008)
A new material constitutive law is implemented in a 2D finite element model to analyse the chip formation and shear localisation when machining titanium alloys. The numerical simulations use a commercial finite element ...