The influence of constitutive material models on accumulated plastic strain in finite element weld analyses
Article dans une revue avec comité de lecture
Auteur
Date
2015Journal
International Journal of Solids and StructuresRésumé
Recent studies in computational weld mechanics have revealed the importance of the material plasticity model when predicting weld residual stresses. The present work seeks to extend this level of understanding to include the effects of the assumed material annealing behaviour, particularly when modelling multi-pass welds that comprise several thermo-mechanical loading cycles. A series of numerical analyses are performed to examine the variability in predicted residual stress profiles for different material models, using a validated finite element model for a three-pass slot weld in AISI 316LN austenitic steel. The material models consider both the work hardening and annealing assumptions for the chosen material. Model sensitivity is established not only from a weld residual stress perspective, but also from an assessment of the post-weld plastic strain accumulated in the weldment. Predictions are compared with indirect measurements acquired using cross-weld micro-hardness maps taken from benchmark specimens. Sensitivity studies reveal that the choice of annealing behaviour will have a significant impact on plastic flow predictions, which is dependent on the annealing temperature specified. Annealing assumptions will have a varying impact on the weld residual stress predictions, such that the extent of sensitivity is dependent on the plasticity model chosen. In contrast, the choice of plasticity model will have a significant effect on the predicted weld residual stresses, but relatively little effect on predictions of equivalent plastic strain.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureRecent studies in computational weld mechanics have revealed the importance of the material plasticity model when predicting weld residual stresses. The present work seeks to extend this level of understanding to include ...
-
Article dans une revue avec comité de lecture
TAJDARY, Pouya;
DORHMI, Khaoula;
MORIN, Léo;
DERRIEN, Katell; HADJEM-HAMOUCHE, Zehoua;
BRAHAM, Chedly; CHEVALIER, Jean-Pierre;
CHEVALIER, Jean-Pierre (Elsevier BV, 2023-09)
The aim of this work is to investigate the damage mechanisms and stiffness loss in Fe-TiB metal-matrix composites during plastic deformation. First, experimental results of interrupted tensile tests are performed to quantify ... -
Article dans une revue avec comité de lectureMARCISZKO-WIACKOWSKA, M; BACZMANSKI, Andrzej;
BRAHAM, Chedly; WATROBA, M.;
WRONSKI, Sebastian; WAWSZCZAK, R.; GONZALEZ, Gonzalo;
KOT, Piotr; KLAUS, Manuela;
GENZEL, Christoph (Elsevier, 2023-06)
In the presented research, the intergranular elastic interaction and the second-order plastic incompatibility stress in textured ferritic and austenitic steels were investigated by means of diffraction. The lattice strains ... -
Article dans une revue avec comité de lectureSIDHOM, Habib; GHANEM, Farhat; AMADOU, Tidiane; GONZALEZ, Gonzalo;
BRAHAM, Chedly (Springer Verlag, 2013)
The localised corrosion resistance of austenitic stainless steels is strongly influenced by the quality of finished surface. EDM machining induces substantial changes by the high thermal gradients generated by electric ... -
Article dans une revue avec comité de lectureMARCISZKO-WIĄCKOWSKA, M.; OPONOWICZ, A.; WĄTROBA, M.; WRÓBEL, M.; KLAUS, M.; GENZEL, Ch.; BACZMANSKI, Andrzej;
BRAHAM, Chedly (2022-05)
The choice of the grain interaction model is a critical element of residual stress analysis using diffraction methods. For the near-surface region of a mechanically polished austenitic steel, it is shown that the application ...