Prediction of Springback After Draw‐Bending Test Using Different Material Models
Communication avec acte
Résumé
Within the framework of sheet metal forming, the importance of hardening models for springback predictions has been often emphasized. While some specific applications require very accurate models, in many common situations simpler (isotropic hardening) models may be sufficient. In these conditions, investigation of the impact of hardening models requires well defined test configurations and accurate measurements to generate the reference data. Specific draw-bend tests have been especially conceived for this purpose. In this work, such a draw-bending experimental device has been designed, for use on a biaxial tension machine. Three different steel sheets have been tested (one mild steel sheet and two HSS sheets) with thicknesses between 0.8 and 2 mm. Up to three different back-force levels were used for the tests. Wall curvatures and springback angles were measured. Finite element simulations of the tests were performed. A parameter sensitivity analysis has been carried out in order to determine the numerical parameters ensuring accurate springback results. The tests were simulated using an isotropic hardening model and a combined isotropic-kinematic hardening model. The impact of the hardening model is explored for the various test configurations and conclusions are drawn concerning their relative importance.
Fichier(s) constituant cette publication
- Nom:
- AMPT 2010 - Racz et al-AIP.pdf
- Taille:
- 1.516Mo
- Format:
- Description:
- Article-AIP-Racz-et-al-2010
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureIn this work, we propose to couple the Gurson-Tvergaard-Needleman (GTN) model, known for its widespread use to describe damage evolution in metallic materials, to the Rice localization criterion. ...
-
Article dans une revue avec comité de lectureIn this contribution, the formulation of the SHB8PS continuum shell finite element is extended to anisotropic elastic-plastic behavior models with combined isotropic-kinematic hardening at large deformations. The resulting ...
-
Communication avec acteMANSOURI, Lotfi;
CHALAL, Hocine;
ABED-MERAIM, Farid ;
BALAN, Tudor (E. Oñate, D.R.J. Owen, D. Peric and B. Suárez, 2011)
The strain localization phenomenon that may occur during sheet metal forming represents a major cause of defective parts produced in the industry. Several instability criteria have been developed in the literature to predict ... -
Communication avec acteMANSOURI, Lotfi;
CHALAL, Hocine;
ABED-MERAIM, Farid ;
BALAN, Tudor (Association Française de Mécanique, 2011)
Le phénomène de localisation des déformations plastiques, qui apparait lors d’opérations de mise en forme des tôles, représente l’une des principales causes de rebut des pièces produites dans l’industrie. Plusieurs critères ... -
Communication avec acteSALAHOUELHADJ, Abdellah;
CHALAL, Hocine;
ABED-MERAIM, Farid ;
BALAN, Tudor (Onate, E; Owen, DRJ; Peric, D; Suarez, B, 2011)
In this contribution, the formulation of the SHB8PS continuum shell finite element is extended to anisotropic elastic-plastic behavior models with combined isotropic-kinematic hardening at large deformations. The resulting ...