Determination of residual stress in nitrided steels with transmission angle-dispersive diffraction
Communication sans acte
Author
BARRALLIER, Laurent JÉGOU, SébastienAbstract
Residual stress analysis with transmission angle-dispersive diffraction is carried out on nitrided steels. It aims evaluating residual stresses within the ferritic matrix but also within secondary phases such as nano-scale nitrides and polycrystalline cementite. Samples of various alloying elements contents are investigated. Results are compared to laboratory X-ray diffraction and micromechanical modeling of gas nitriding of steels.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Communication avec acte; ; ;BARRALLIER, Laurent; JÉGOU, Sébastien (2015)
In this study, Stress Corrosion Cracking (SCC) produced for 304L austenitic stainless steel in different concentrations of chloride containing sulfuric acid solutions was analyzed using both Scanning Electron Microscope ...
-
Communication sans acte; ; ;BARRALLIER, Laurent; JÉGOU, Sébastien (2015)
Stress Corrosion Cracking (SCC) is a typical failure of engineering materials applied in corrosive environments. In light water reactors for example, this results in loss of electrical capacity and related costs of repair ...
-
Communication sans acteFABRE, Agnès; BARRALLIER, Laurent; JÉGOU, Sébastien (2014)
Le rodage est un phénomène présent lors des premiers cycles de frottement qui modifie la surface de contact d’une pièce d’un point de vue géométrique, couplé à des modifications de propriétés mécaniques. Le rodage génère ...
-
Article dans une revue avec comité de lecture;BARRALLIER, Laurent; JÉGOU, Sébastien; KUBLER, Regis (Hanser, 2011)
Development and evolution of compressive residual stress during nitriding treatment are studied. A model carbon iron-based alloy Fe-3wt.%Cr-0.35wt.%C was nitrided in gas at 550 °C for different times. Microstructural ...
-
Article dans une revue avec comité de lecture; ; ;BARRALLIER, Laurent; JÉGOU, Sébastien (Materials Research Forum LLC, 2016)
The objective of this work is to propose a model abled to optimize the mechanical properties from gaseous nitriding of steels (hardness, residual stresses) for a given loading and fatigue lifetime. Multiaxial fatigue ...