Modeling and Analysis of Five-Axis Milling Configurations and Titanium Alloy Surface Topography
Article dans une revue avec comité de lecture
Date
2016Journal
Journal of Manufacturing Science and EngineeringAbstract
Five-axis milling with a ball-end cutter is commonly used to generate a good surface finish on complex parts, such as blades or impellers made of titanium alloy. The five-axis milling cutting process is not straight forward; local cutting conditions depend a lot on the geometrical configuration relating to lead and tilt angles. Furthermore, the surface quality is greatly affected by the cutting conditions that define the milling configuration. This study presents a geometrical model of five-axis milling in order to determine the effective cutting conditions, the milling mode, and the cutter location point. Subsequently, an analysis of surface topography is proposed by using the geometrical model, local criteria, and a principle component analysis of experimental data. The results show the effects of local parameters on the surface roughness, in relation to the lead and tilt angles.
Files in this item
- Name:
- LABOMAP_JMSE_2016_PRAT.pdf
- Size:
- 1.312Mb
- Format:
- Description:
- Article scientifique
Collections
Related items
Showing items related by title, author, creator and subject.
-
Communication avec acteThe 5 axis continuous milling is an advanced technique for free-form surfaces manufacturing. In finishing, this technique uses ball-end or hemispherical milling cutter. This type of operation for 5 axis milling allows the ...
-
Communication avec acteDUCROUX, Edouard; PRAT, David; D'ACUNTO, Alain; VIPREY, Fabien; FROMENTIN, Guillaume (Elsevier BV, 2019)Trochoidal path increases productivity, tool life and reduces cutting forces compare to classical slot milling. Consequently, this strategy is well adapted to improve the milling performance in refractory alloy such as ...
-
Article dans une revue avec comité de lectureDUCROUX, Edouard; PRAT, David; VIPREY, Fabien; D’ACUNTO, Alain; FROMENTIN, Guillaume (Society of Manufacturing Engineers, 2021)Inconel 718 is widely used in aircraft industry due to its properties. Nevertheless, its mechanical and chemical properties make it hard-to-cut. As a consequence, additive manufacturing is developed in order to get near ...
-
Article dans une revue avec comité de lectureDENGUIR, Lamice; BESNARD, Aurélien; FROMENTIN, Guillaume; POULACHON, Gérard; ZHU, Xiaowen (Taylor & Francis, 2014)One of the criteria mastering the choice of a cutting tool is its wear resistance. In this paper, tool life is treated: on one hand, the study aims to classify the performances of the edge preparations in terms of ...
-
Communication avec acteOUTEIRO, José; POULACHON, Gérard; GERMAIN, Guénaël; BATISTA, Antonio; ROSSI, Frederic; FROMENTIN, Guillaume (Elsevier, 2013)The corrosion resistance of magnesium alloys depends mainly on its surface integrity. Previous experimental studies have shown that machining can induces small (nano-scale) grain size, compressive residual stresses and ...