Toward on-line robot vibratory modes estimation
Communication avec acte
Date
2014Résumé
This paper is concerned with preliminaries results on robot vibratory modes on-line estimation. The dominating oscillatory mode of the robot arm is isolated by comparing the robot position given by the motors encoders and an external measure at the tool-tip of the robot arm. In this article the external measurement is provided by a laser tracker. The isolation of the oscillation permits to identify the vibratory mode, i.e. the natural frequency and the damping ratio of the undesired phenomena. Here we propose a comparison between the algebraic method and the sliding modes for the parameter identification. This comparison is motivated by the fact that both methods provide finite time convergence. Experimental identifications are proposed on a 6 degrees of freedom (DOF) manipulator robot, St¨aubli RX-170B.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureNowadays, the adaptation of industrial robots to carry out high-speed machining operations is strongly required by the manufacturing industry. This new technology machining process demands the improvement of the overall ...
-
Communication avec acteThe use of industrial robots in many fields of industry like prototyping, pre-machining and end milling is limited because of their poor accuracy. Robot joints are mainly responsible for this poor accuracy. The flexibility ...
-
Article dans une revue avec comité de lectureJerk-limited trajectories are a widespread solution for the trajectory planning of industrial machines Tools or robots. It is known that jerk limitation can reduce vibrations and in some cases can totally suppress residual ...
-
Communication avec acteIn this work, redundancy resolution has been employed to increase the Cartesian mechanical rigidity of 7 DOF robot manipulators during tasks requiring stiff interactions with the environment (e.g. milling or drilling). The ...
-
Article dans une revue avec comité de lectureSELINGUE, Maxime; OLABI, Adel; THIERY, Stéphane; BEAREE, Richard (Springer Science and Business Media LLC, 2023-10)Absolute accuracy of industrial robot is required for most of industrial applications. However, positioning errors of several millimeters are induced by many factors. Hybrid calibration, combining analytical model and ...