Degradation of gaseous nitriding of steel by lubricant contamination — Effect of in-situ pre-treatments
Article dans une revue avec comité de lecture
Date
2017Journal
Surface and Coatings TechnologyAbstract
The present work focuses on the industrial inhibition of gaseous nitrided parts and on the industrial in-situ pre-treatment that can be used to avoid these inhibitions. The first objective is to obtain a repeatable defective nitriding process on carbon iron-based alloys, while the second is to determine the ability of determined in-situ pre-treatments to counter the previously mastered inhibition. Machining oil is used in order to obtain an industrially consistent inhibition. Its presence before chemical treatment strongly inhibits the adsorption of nitrogen atoms at the other surface, leading to heterogeneous nitriding properties of the treated samples. EDS analysis of oil residues indicates the presence of several elements, such as sulphur and carbon. As several studies already focused on the influence of sulphur on nitriding properties, experimentations on the influence of carbon are detailed. Contamination by carbon deposit leads to similar inhibition as in the case of a machining oil contamination. Literature analyses lead to the determination of three in-situ pre-treatments, namely urea (CH4N2O), pre-oxidation and ammonium chloride (NH4Cl), to counter the detrimental effects such contaminations. Although all the processes enable to suppress the nitriding inhibition due to the presence of machining oil, ammonium chloride indicates the best capability to activate the adsorption of nitrogen of machining oil contaminated surfaces.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Communication avec acteGaseous nitriding is a well-established thermochemical treatment of carbon iron-based alloys that considerably enhances corrosion, wear and fatigue resistances of critical mechanical parts such as crank shafts and bearings. ...
-
Communication avec acteMachining is known to introduce plastic straining and residual stress gradients in surface of mechanical parts. If not controlled, the mechanical state of a surface can influence adsorption and diffusion of atoms during ...
-
Article dans une revue avec comité de lectureWEIL, Hadrien; COURLEUX, Alice; BECK, Guillaume; BARRALLIER, Laurent; JÉGOU, Sébastien (Università di Cassino, 2016)The present study aims to develop an algorithm able to predict the fatigue lifetime of nitrided steels. Linear multi-axial fatigue criteria are used to take into account the gradients of mechanical properties provided by ...
-
Determination of residual stress in nitrided steels with transmission angle-dispersive diffraction Communication sans acteResidual stress analysis with transmission angle-dispersive diffraction is carried out on nitrided steels. It aims evaluating residual stresses within the ferritic matrix but also within secondary phases such as nano-scale ...
-
Communication avec acteIn this study, Stress Corrosion Cracking (SCC) produced for 304L austenitic stainless steel in different concentrations of chloride containing sulfuric acid solutions was analyzed using both Scanning Electron Microscope ...