CFD simulation and optimize of LN2 flow inside channels used for cryoge nic machining: application to milling of titani um alloy Ti - 6Al - 4V
Communication avec acte
Abstract
Cryogenic machining is seen as a possible solution to increase tool life and improve surface integrity of machined components, by efficiently removing the heat from the cutting zone. Unfortunately, most of the publications on this topic does not investigate properly the physical phenomena occurring inside the pipe connecting the tankto the cutting tools/nozzle. These phenomena will affect the cryogenic flow characteristics at nozzle outlet, thus the performance of the cryogenic machining. In this work, a CFD model is developed and applied to investigate the liquid nitrogen (LN2) flow inside the pipe connecting the reservoir to the cutting tool/nozzle. The results show that the effectiveness of the cooling process depends not only on the input flow parameters (pressure, velocity, temperature and gas/liquid fraction), but also on the pipe geometry.
Files in this item
- Name:
- LABOMAP_PROCCIRP_2017_TAHRI.pdf
- Size:
- 920.4Kb
- Format:
- Description:
- Article principal
Collections
Related items
Showing items related by title, author, creator and subject.
-
Thermomechanical analysis induced by interrupted cutting of Ti6Al4V under several cooling strategies Article dans une revue avec comité de lectureCryogenic machining has mainly investigated in continuous cutting. Therefore, there is a lack of knowledge on the application of this technology to interrupted cutting, such as in milling. This study aims to investigate ...
-
Article dans une revue avec comité de lectureCryogenic assisted machining has become a very popular method in the metal cutting industry, as it enables the cooling of a cutting zone for improving surface integrity or/and tool life without contaminating the machined ...
-
Article dans une revue avec comité de lectureLOUHICHI, Mohamed Ali; POULACHON, Gerard; LORONG, Philippe; MARTINS DO OUTEIRO, Jose Carlos; MONTEIRO, Eric; COTTON, Dominique (Informa UK Limited, 2023-06-02)Residual stresses distributions induced by heat treatment of AA 7075-T6 alloy were modeled and simulated. Models of quenching followed by tempering were developed and simulated using the Finite Element Method (FEM). To ...
-
Article dans une revue avec comité de lectureCHERIF, Iheb; COTTON, Dominique; OUTEIRO, José; BROSSE, Alexandre; REBELO KORNMEIER, Joana; POULACHON, Gerard (Springer Verlag, 2019)Machining part distortion is due to residual stresses induced by previous manufacturing processes. This study aims to evaluate the influence of machining conditions on AISI 316L plate distortion. Therefore, a special ...
-
Article dans une revue avec comité de lectureCAMPOCASSO, Sébastien; BISSEY BRETON, Stéphanie; COSTES, Jean-Philippe; OUTEIRO, José; POULACHON, Gerard (Elsevier, 2017)Mechanistic cutting force modelling generally involves coefficients identification from machining tests. In order to develop multi-material cutting force models avoiding identification, several studies have tried to link ...