A review about the effects of structural and operational factors on the gigacycle fatigue of steels
Date
2018Journal
Fatigue and Fracture of Engineering Materials and StructuresRésumé
It is well‐known that the high cycle fatigue (HCF) strength of steel components is influenced by a lot of factors depending on both material, loading (including environment), specimen or component geometry (design), and manufacturing process. Based on a literature review of a lot of experimental data, a synthesis is proposed in this paper to discuss the effect of the structural and operational factors on the very high cycle fatigue (VHCF) characteristics of steels. HCF and VHCF regimes are distinguished in terms of failure mechanisms and S‐N curve shapes for high and low strength steels. Then, the effect of the microstructural and mechanical features on the VHCF resistance is debated as different parameters (microstructure, inclusion size type and depth, hydrogen, environment, maximum tensile strength, and residual stresses). Next, the influence of the loading conditions is addressed by taking into account both the frequency effect, the highly stressed volume, the loading type, and loading ratio. Finally, the influence of the testing techniques used in VHCF experiments is discussed.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureThis paper is focused on the effect of sea water corrosion on the gigacycle fatigue strength of a martensitic–bainitic hot rolled steel R5 used for manufacturing off-shore mooring chains for petroleum platforms in the North ...
-
Communication sans acteDue to its specific mechanical properties, tantalum is often used in strength-demanding military applications. High cycle fatigue (HCF) behaviour of pure tantalum, however, has been rarely reported and the mechanisms at ...
-
Article dans une revue avec comité de lectureAn analysis of high cycle multiaxial fatigue behaviour is conducted through the numerical simulation of polycrystalline aggregates using the finite element method. The metallic material chosen for investigation is pure ...
-
Article dans une revue avec comité de lectureThis paper proposes a method to assess the high-cycle multiaxial fatigue strength of components treated by surface induction hardening (SIH). Surface quenching following surface induction heating is simulated, taking into ...
-
Article dans une revue avec comité de lectureOBORIN, V.; BANNIKOV, M.V.; NAIMARK, O.B; PALIN-LUC, Thierry (MAIK Nauka/Interperiodica (МАИК Наука/Интерпериодика), 2010)The role of the collective behavior of defect ensembles at the crack tip and the laws of fatigue crack propagation in R4 high-strength steel have been studied under conditions of symmetric tension-compression gigacycle ...