A bi-harmonic five-phase SPM machine with low ripple torque for marine propulsion
Communication avec acte
Résumé
This paper addresses the design of a bi-harmonic five-phase Surface-mounted Permanent Magnet (SPM) machine for marine propulsion. The bi-harmonic characteristic results from the particular 20 slots-8 poles configuration that makes possible high value of third harmonic current injection. Thus the machine performance can be improved in terms of average torque, speed range, losses control and torque quality, this last feature being the scope of the paper. As low ripple torques are wanted at low speed, the magnet layer is defined to reduce the cogging torque and to make third harmonic current injection increasing average torque and reducing pulsating torque in the same time. According to a selection procedure based on the numerical simulations of a high number of machines, it appears that designing the rotor with two identical radially magnetized magnet that cover two-third the pole arc allows to reach this goal. Referring to an equivalent three-phase machine, the torque ripple level of the bi-harmonic five-phase machine is more than three times lower, thus being obtained with a simple control strategy that aims at achieving constant currents in the rotating frames. The time simulations of the drive confirm the significant reduction of the speed oscillation, especially at low speed.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication avec acteThe paper studies the impact of first and third current-harmonic repartition in a five-phase Permanent Magnet machine whose Electromotive Forces (emfs) have first and third harmonics of the same amplitude. With a five-phase ...
-
Communication avec acteIn this paper, the possibility of designing a five-phase Surface-mounted Permanent Magnet (SPM) machine with 20 slots and 8 poles for a low power marine propulsion system is examined. Due to its particular winding and ...
-
Article dans une revue avec comité de lectureThe purpose of the paper is to present the potentialities in terms of the control of a new kind of PM synchronous machine. With five phases and electromotive forces whose first (E1) and third (E3) harmonics are of similar ...
-
Article dans une revue avec comité de lectureGONG, Jinlin; ZAHR, Hussein; TRABELSI, Mohamed; ASLAN, Bassel; SEMAIL, Eric; SCUILLER, Franck (Institute of Electrical and Electronics Engineers, 2018)In the context of traction drives with required torque transient capabilities and a classically wide flux weakening speed range, this paper gives design considerations of a particular Double-Polarity (DP) five-phase machine. ...
-
Communication avec acteIn this paper, the possibility of designing a fivephase Surface-mounted Permanent Magnet (SPM) machine with 20 slots and 8 poles for a low power marine propulsion system is examined. Due to its particular winding and surface ...