Microstructure and texture evolution of the Al-20sn alloy processed by equal-channel angular pressing using route C
Article dans une revue avec comité de lecture
Author
Date
2014Journal
Materials TransactionsAbstract
In this work, the microstructure and texture evolution of an Al-20Sn (mass%) alloy processed by Equal Channel Angular Pressing is presented. The evolution of dislocation cells into subgrains and the mechanical response of the deformed alloy have been emphasized. Samples were characterized by transmission electron microscopy, X-ray diffraction (for microstrain and texture measurements) and Vickers microhardness. It was found, that Al grains, suffered the highest degree of deformation during the ECAP process, however, the evidence showed that the deformation was largely heterogeneous, in terms of crystalline domain and feasibly in misorientation angles. The initial copper texture changes throughout the ECAP process forming an incipient shear texture component (111)[11-2]. The heterogeneity of the results obtained from the Vickers microhardness mapping could be associated to the microstructure resulted after the ECAP process. © 2014 The Japan Institute of Metals and Materials.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureRUIZ, Carlos Reyes; FIGUEROA, Ignacio A.; BRAHAM, Chedly; CABRERA, José M.; ISMELI, Alfonso; GONZALEZ, Gonzalo (Nihon Kinzoku Gakkai, 2015)Equal channel angular pressing (ECAP) is a severe plastic deformation (SPD) technique that produces nanostructured materials. Based on a remarkable grain size reduction, this process has led to improve mechanical properties, ...
-
Article dans une revue avec comité de lectureGONZALEZ, Gonzalo; BRAHAM, Chedly; LEBRUN, Jean-Lou; CHASTEL, Yvan; SEILER, Wilfrid; FIGUEROA, Ignacio A. (Nihon Kinzoku Gakkai, 2012)The influence of Sn on the microstructure, microstrain and grain morphology in Al–2Si–xSn samples processed by ECAP is reported and discussed. The pseudo-binary Al–xSn alloys (where x = 0, 4, 8 mass%) were produced by ...
-
Article dans une revue avec comité de lectureFIGUEROA, Ignacio A.; NOVELO-PERALTAA, O.; GONZÁLEZA, G.; LARA-RODRÍGUEZA, G. A.; LÓPEZ, Ismeli Alfonso (University of Belgrade, 2016)The processing of aluminum (Al) foams with maximum porosity of around 70 %, regular pore size and interconnected pores were successfully produced by means of the powder metallurgy method of Sintering Dissolution Process ...
-
Article dans une revue avec comité de lectureROMERO-RESENDIZ, L.; REYES-RUIZ, Carlos; CABRERA, José María; BRAHAM, CHEDLY; GONZÁLEZ, Gonzalo (Elsevier, 2019)The mechanical behavior and microstructural evolution of an AA2017 aluminum alloy processed by ECAP with an equivalent simple shear deformation of ∼6 at 200 °C were studied. Samples were characterized by means of scanning ...
-
Article dans une revue avec comité de lectureRHOUMA, Amir Ben; SIDHOM, Naziha; MAKHLOUF, Kamel; SIDHOM, Habib; BRAHAM, Chedly; GONZÁLEZ, Gonzalo (Springer Verlag, 2019)The effects of machining such as grinding and turning on the microstructural and mechanical changes of the machined surfaces of AISI 316L stainless steel (SS) have been studied. Surface aspects and surface defects have ...