RLCYC 75: A 2 kW electrically calibrated laser calorimeter designed for Laser MegaJoule diagnostics calibration
Article dans une revue avec comité de lecture
Résumé
RLCYC 75 is a new electrically calibrated laser calorimeter specially manufactured by Laser Metrology to calibrate energy diagnostics within the Laser MegaJoule (LMJ) facility. It consists of an optical cavity cooled by a hydraulic system. The system is designed to provide 1 m wavelength power laser measurements with uncertainty less than 1% at 2 kW and traceability to the International System of Units (SI). In this paper, the accuracy of RLCYC 75 measurements is studied. More precisely, three points are detailed: instrumentation uncertainty estimation, equivalence between optical and electrical supply and light absorption. To this end, electrical calibration campaigns and power laser measurement campaigns are conducted. Moreover, thermal and optical models are developed. Results show that RLCYC 75 design and instrumentation are efficient enough to reach the goal of relative uncertainty of about 1% at 2 kW. RLCYC 75 will become the 2 kW laser power primary standard for LMJ applications.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication avec acteSELA, Andres; ORTIZ-DE-ZARATE, Gorka; SOLER, Daniel; ARISTIMUÑO, Patxi; SORIANO, Denis; GERMAIN, Guénaël; DUCOBU, François; ARRAZOLA, Pedro José (Elsevier BV, 2020)Surface integrity directly affects the mechanical behavior of the workpiece, which is especially relevant on fatigue behavior. To characterize the quality of the machined surface, aspects such as material damage, roughness ...
-
Article dans une revue avec comité de lectureDELACROIX, Timothée; LOMELLO, Fernando; SCHUSTER, Frederic; MASKROT, Hicham; JACQUIER, Vincent; LAPOUGE, Pierre; COSTE, FREDERIC; GARANDET, Jean Paul (2023)Costs and resource efficiency of laser powder bed fusion (L-PBF) are highly dependent on the ability to produce high quality parts with recycled powders. There is a need to control the quality of the material, which has a ...
-
Article dans une revue avec comité de lectureDROUEN, Laurent; CHARPENTIER, Jean-Frederic; ASTOLFI, Jacques Andre; SEMAIL, Eric; HAUVILLE, Frederic; CLENET, Stephane (EDP Sciences, 2015)Le travail présenté concerne le développement d’une méthodologie de conception de systèmes hydroliens innovants de type RIM‑DRIVEN pour la récupération de l’énergie des courants de marée. L’originalité d’un système RIM‑DRIVEN ...
-
Communication avec acteDROUEN, Laurent; CHARPENTIER, Jean-Frederic; HAUVILLE, Frederic; ASTOLFI, Jacques Andre; SEMAIL, Eric; CLENET, Stephane (SHF, 2013)Le travail présenté concerne le développement d’une méthodologie de conception de systèmes hydroliens innovants de type RIM-DRIVEN pour la récupération de l’énergie des courants de marée. L’originalité d’un système RIM-DRIVEN ...
-
Article dans une revue avec comité de lectureCOSTES, Jean-Philippe; EVRARD, Arnaud; BIOT, Benjamin; KEUTGEN, Gauthier; DARAS, Amaury; DUBOIS, Samuel; LEBEAU, Frédéric; COURARD, Luc (Stamats Communications, Inc, 2017)The thermal conductivity of straw bales is an intensively discussed topic in the international straw bale community. Straw bales are, by nature, highly heterogeneous and porous. They can have a relatively large range of ...