Relationship between fiber chemical treatment and properties of recycled pp/bamboo fiber composites
Article dans une revue avec comité de lecture
Date
2010Journal
Journal of Reinforced Plastics and CompositesAbstract
This article reports the preparation of recycled polypropylene (RPP)/bamboo fiber (BF) composite via direct melt blends using a twin screw extruder. The effects of the chemical treatment of BF surface (alkaline and acetylation) on fiber structure and composite mechanical, thermal, rheological properties have been investigated. We showed that alkali treatment increases the contact surface of BF within composites, resulting in a more homogenous dispersion of fibers in the polymer matrix. Alkali treatment improves mechanical properties such as tensile strength as well as the Charpy impact strength. Reinforced composites obtained with acetylated BF show better mechanical properties due to grafting of acetyl groups onto the cellulose fiber surface and thus improve compatibility between BF and matrix. The rheological properties of RPP/BF composites depending on the BF content and treatment methods are also analyzed. Predominant factors that influence the properties of relevant materials are identified. Maleic anhydride grafted polypropylene is used as a compatibilizer to improve the adhesion between the cellulosic phase and the RPP matrix.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureTRI, Phuong Nguyen; DOMENEK, Sandra; GUINAULT, Alain; SOLLOGOUB, Cyrille (Wiley, 2013)The morphology and miscibility of commercial poly(lactide) (PLA)/poly(b-hydroxybutyrate) (PHB, from 5 to 20 wt %) blends prepared by melt extrusion method, were investigated using differential scanning calorimetry (DSC) ...
-
Communication sans acteGERVAIS, Matthieu; ALKHUDER, A; GRANDMONTAGNE, A.; GUINAULT, Alain; SOLLOGOUB, Cyrille (2013)The significant increase of Waste Electric and Electronic Equipment (WEEE) has led to an important research in upgrading recycled engineering plastics by means of a blending technique. In particular, there is an interest ...
-
Article dans une revue avec comité de lectureBOUFARGUINE, Majdi; GUINAULT, Alain; MIQUELARD-GARNIER, Guillaume; SOLLOGOUB, Cyrille (Wiley-VCH Verlag, 2013)Blending poly(lactic acid) (PLA) with a small amount of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV; 10 wt%) using a custom multilayer co-extrusion process increases both ductility and gas barrier properties of ...
-
Article dans une revue avec comité de lectureRASSELET, Damien; RUELLAN, Alexandre; GUINAULT, Alain; MIQUELARD-GARNIER, Guillaume; SOLLOGOUB, Cyrille;
FAYOLLE, Bruno (Elsevier, 2014)
The thermo-oxidative degradation of polylactide (PLA) films was studied between 70 and 150 C. It was shown that the oxidative degradation of PLA leads to a random chain cission responsible for a reduction of the molar ... -
Article dans une revue avec comité de lectureMESSIN, Tiphaine; FOLLAIN, Nadège; GUINAULT, Alain; MIQUELARD-GARNIER, Guillaume; SOLLOGOUB, Cyrille; DELPOUVE, Nicolas; GAUCHER, Valérie; MARAIS, Stéphane (Elsevier, 2017)The transport properties were specifically investigated from water and gas permeation kinetics, and the corresponding permeation parameters were determined. The confinement effect of MXD6 in the multilayer structure was ...