A novel technique for dynamic shear testing of bulk metals with application to 304 austenitic stainless steel

Abstract

This paper describes a new single-shear specimen (SSS) and method to characterize the dynamic shear behavior of bulk metals using a traditional Split Hopkinson Pressure Bar (SHPB). By this method, the shear behavior of materials can be tested conveniently over a wide range of strain rates within 105 s−1. This technique was applied to a 304 austenitic stainless steel (ASS) under shear strain rates from 0.001 s−1 to 38700 s−1 at room temperature. Based on finite element (FE) simulations, it was found that the deformation of the specimen shear zone was dominated by shear stress/strain components. Stress state parameters represented by stress triaxiality η and Lode angle parameter θ- were found very close to zero, indicating a deformation mode of simple shear. Besides, an obvious gap existed between the local deformation behavior in the specimen shear zone and the macroscopic stress-strain relations measured by the strain gauges on the SHPB bars. A correction coefficient method was adopted to extract the real shear behavior from the experimentally obtained force-displacement data. Through comparisons between the tested and simulated stress-strain curves, a good agreement was obtained.