Investigation of the superelastic behavior of a Ti-16Zr-13Nb-2Sn sputtered film by nanoindentation
Article dans une revue avec comité de lecture
Date
2021Journal
Surface and Coatings TechnologyRésumé
A new Ti-16Zr-13Nb-2Sn superelastic film incorporating beta-stabilizing and highly biocompatible elements was elaborated by magnetron sputtering. The morphological, crystallographic and microstructural characteristics of the obtained films were studied by scanning electron microscopy, atomic force microscopy, X-ray diffraction, and transmission electron microscopy. Superelastic response of the film was investigated at local scale by nano-indentation using both spherical and Berkovich indenters. The sputter-deposited film revealed nanograined beta microstructure with preferential growth orientation along [110] direction and excellent superelastic recovery at room temperature. Special attention was paid to the indenter geometry influencing reliable evaluation of the superelastic nature of the film. Evolution of the deformation mechanisms during nanoindentation at increasing depths was rationalized by the calculated representative strain beneath the indenting tips and is discussed in this work.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
BrevetLAHEURTE, Pascal; PRIMA, Frederic; GLORIANT, Thierry; ELMAY, Wafa; EBERHARDT, André; PATOOR, Etienne (2014)Selon un procédé de traitement thermomécanique d'un alliage de titane comportant entre 23 et 27% de niobium en proportion atomique, entre 0 et 10% de zirconium, et entre 0 et 1% d'oxygène, d'azote et/ou de silicium, on ...
-
Article dans une revue avec comité de lectureIJAZ, M. F.; CASTANY, P.; THIBON, I.; GLORIANT, T.; HERAUD, Lorene (Springer Verlag/ASM International, 2020)In this this work, superelastic NiTi and Ni-free Ti-23Hf-3Mo-4Sn biomedical alloys were investigated by tensile tests in relationship with their microstructures. To follow the stress-induced martensitic transformations ...
-
Article dans une revue avec comité de lectureELMAY, Wafa; PATOOR, Etienne; GLORIANT, Thierry; PRIMA, Frederic; LAHEURTE, Pascal; BERVEILLER, Sophie (Elsevier, 2017)The present paper deals with an in-situ X-ray diffraction analysis during cyclic tensile tests of a fully martensitic Ti-24Nb alloy. Texture evolution of martensite α″ phase was followed during loading-unloading cycles. ...
-
Article dans une revue avec comité de lectureSHENG, Lei; ZHOU, Zhibin; CHARPENTIER, Jean-Frederic; BENBOUZID, M.E.H. (Elsevier, 2016)Due to the high predictability and the high energy density, marine tidal resource has become an area of increasing interest with various academic and industrial projects around the world. In fact, several Marine Current ...
-
Article dans une revue avec comité de lectureZHOU, Yinghui; LIN, Xin; KANG, Nan; TANG, Yao; HUANG, Weidong; WANG, Zhennan (Elsevier BV, 2022-01)In this study, a 2219 Al alloy with a heterogeneous band structure characterized by an alternating distribution of equiaxed and columnar α-Al grains was obtained by wire + arc additive manufacturing. The volume fractions ...