Liquid metal embrittlement of a dual-phase Al0.7CoCrFeNi high-entropy alloy exposed to oxygen-saturated lead-bismuth eutectic
Article dans une revue avec comité de lecture
Auteur
Date
2021Journal
Scripta MaterialiaRésumé
This paper reports a new liquid metal embrittlement (LME) system in which a dual-phase Al0.7CoCrFeNi (equimolar fraction) high-entropy alloy (HEA) is embrittled by lead-bismuth eutectic (LBE) at 350 and 500°C. At 350°C, (Ni, Al)-rich BCC phase is embrittled, leading to intragrain cracking within this phase, while the predominant cracking mode changes to BCC/FCC phase boundary decohesion at 500°C. At both temperatures, cracks are rarely seen in the (Co, Cr, Fe)-rich FCC phase, indicating that this phase is immune to LME. Furthermore, the results suggest a transition from an adsorption-dominated LME mechanism at 350°C to a phase boundary wetting-dominated LME mechanism at 500°C.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureGONG, Xing; AUGER, Thierry; ZHU, Wenjian; LEI, Huasheng; XIANG, Congying; YU, Zhiyang; SHORT, Michael; WANG, Pei; YIN, Yuan (Elsevier, 2021-12-23)After exposure to oxygen-poor (10^-13–10^-14 wt%) liquid lead-bismuth eutectic (LBE) at 500°C for 500 h, LBE penetrates more than one order of magnitude deeper in an FCC Al0.4CoCrFeNi high-entropy alloy (HEA) deco-rated ...
-
Article dans une revue avec comité de lectureGONG, Xing; SHORT, Michael P.; AUGER, Thierry; CHARALAMPOPOULOU, Evangelia; LAMBRINOU, Konstantina (Elsevier BV, 2022-01-24)Liquid lead (Pb)- and lead–bismuth eutectic (LBE)-cooled fast neutron reactors (Gen-IV LFRs) are one of the most technologically mature fission reactor technologies, due to their inherent safety, high power density, and ...
-
Article dans une revue avec comité de lectureWe report an ab-initio study of grain-boundary wetting (GBW) in three systems (Fe/Zn, Fe/Pb & Fe/Bi) on a Σ5(013)[100] tilt grain boundary. An energy-based approach is pursued and adapted to the study of liquid-metal/solid-metal ...
-
Article dans une revue avec comité de lectureGU, Guo-Chao; XIANG, Li-Xin; LI, Rui-Fen; ZHENG, Hong-Liang; LU, Yu-Peng;
PESCI, Raphaël (Elsevier BV, 2023-09)
The challenges commonly associated with conventional high pressure die casting (HPDC) have led to increased interest in semi-solid metal (SSM) forming processes. In the present study, semi-solid slurries of A356 alloy ... -
Article dans une revue avec comité de lectureWU, Jiajun; JIANG, Jindong; CHEN, Qiang;
CHATZIGEORGIOU, George;
MERAGHNI, Fodil (Elsevier BV, 2023-12)
We present a deep learning framework that leverages computational homogenization expertise to predict the local stress field and homogenized moduli of heterogeneous materials with two- and three-dimensional periodicity, ...