In-situ mapping of local orientation and strain in a fully operable infrared sensor
Article dans une revue avec comité de lecture
Date
2021Journal
Acta MaterialiaRésumé
Hybridized focal plane array (FPA) HgCdTe (MCT) sensors are the workhorse of high performance infrared detectors covering a broad range of applications from space investigation to gas monitoring. Despite the improvements in the performance of these sensors in the last decades, device failure due to the lattice and thermal expansion mismatches between MCT and the Si readout circuit still affects the overall MCT detector performance. In this work, we use in-situ dark-field X-ray microscopy (DFXM) to map the struc tural variations of a fully operable MCT sensor at temperatures down to 80 K. We report, for the first time, on the nanoscale structural evolution over a large population of photodiodes at operating temper atures with high spatial and angular resolution. Our results show that lattice distortion and strain in the MCT epilayer increases at lower temperatures. The FWHM values of the rocking curves reach up to 0.02◦ at 80 K, three times higher than the room temperature value. The thermal cycle results show that the thermal effects are almost completely reversible and the measured strain is in the elastic regime. We discuss the origin of the temperature-generated structural modifications using complementary finite element modelling
Fichier(s) constituant cette publication
- Nom:
- LEM3_Acta Materialia_PESCI_2021.pdf
- Taille:
- 3.884Mo
- Format:
- Fin d'embargo:
- 2022-05-01
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Current Harmonic Eliminations for Seven-Phase Non-sinusoidal PMSM Drives applying Artificial Neurons Ouvrage scientifiqueVU, Duc Tan; NGUYEN, Ngac Ky; SEMAIL, Eric; NGUYEN, Thi Thanh Nga (Springer International Publishing, 2020-11)This study is to deal with unwanted current harmonics in rotating (d-q) frames of a 7-phase non-sinusoidal permanent magnet synchronous machine (PMSM) in a wye-connected winding topology. The machine is supplied by a 7-leg ...
-
Current Harmonic Eliminations for Seven-Phase Non-sinusoidal PMSM Drives applying Artificial Neurons Communication avec acteVU, Duc Tan; NGUYEN, Ngac Ky; SEMAIL, Eric; NGUYEN, Thi Thanh Nga (Lecture Notes in Networks and Systems, Springer, 2020)This study is to deal with unwanted current harmonics in rotating (d-q) frames of a 7-phase non-sinusoidal permanent magnet synchronous machine (PMSM) in a wye-connected winding topology. The machine is supplied by a 7-leg ...
-
Article dans une revue avec comité de lectureNGUYEN, Anh Ngoc; SOLARD, Jeanne; NONG, Huyen Thi Thanh; OSMAN, Chirine Ben; GÓMEZ, Andrés; BOCKELÉE, Valérie; TENCÉ-GIRAULT, Sylvie; SCHOENSTEIN, Frederic; SIMÓN-SORBED, Maite; CARRILLO, Anna Esther; MERCONE, Silvana (MDPI, 2020)We optimize the elaboration of very thin film of poly(vinylidene fluoride) (PVDF) polymer presenting a well-controlled thickness, roughness, and nano-inclusions amount. We focused our effiort on the spin coating elaboration ...
-
Article dans une revue avec comité de lectureABDELLI, Djamel Eddin; NGUYEN, Thanh Hung; CLENET, Stéphane; CHERIET, Ahmed (Institute of Electrical and Electronics Engineers, 2019)The calculation of the Probability Of Detection (POD) in Non Destructive Eddy Current Testing requires the solution of a stochastic model requiring numerous calls of a numerical model leading to a huge computation time. ...
-
Article dans une revue avec comité de lectureKHAN, Armaghan; NGUYEN, Thanh Hung; ABBA, Gabriel; LEMAIRE-SEMAIL, Betty; GIRAUD-AUDINE, Christophe (EDP Sciences, 2014)Application of vibration in metal forming process has already shown numerous advantages in the past. It improves not only mechanical and surface properties of workpiece but the integration of vibration in metal forming ...