Cavitation control using passive flow control techniques
Article dans une revue avec comité de lecture
Abstract
Passive flow control techniques, and particularly vortex generators have been used successfully in a broad range of aero- and hydrodynamics applications to alter the characteristics of boundary layer separation. This study aims to review how such techniques can mitigate the extent and impact of cavitation in incompressible flows. This review focuses first on vortex generators to characterize key physical principles. It then considers the complete range of passive flow control technologies, including surface conditioning and roughness, geometry modification, grooves, discharge, injection, obstacles, vortex generators, and bubble generators. The passive flow control techniques reviewed typically delay and suppress boundary layer separation by decreasing the pressure gradient at the separation point. The literature also identifies streamwise vortices that result in the transfer of momentum from the free stream to near-wall low energy flow regions. The area of interest concerns hydraulic machinery, whose performance and life span are particularly susceptible to cavitation. The impact on performance includes a reduction in efficiency and fluctuations in discharge pressure and flow, while cavitation can greatly increase wear of bearings, wearing rings, seals, and impeller surfaces due to excessive vibration and surface erosion. In that context, few studies have also shown the positive effects that passive controls can have on the hydraulic performance of centrifugal pumps, such as total head and efficiency. It is conceivable that a new generation of design in hydraulic systems may be possible if simple design features can be conceived to maximize power transfer and minimize losses and cavitation. There are still, however, significant research gaps in understanding a range of impact factors such as manufacturing processes, lifetime, and durability, and essentially how a static design can be optimized to deliver improved performance over a realistic range of operating conditions.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureA prototype device for measuring the volumetric flow-rate by counting vortices has been designed and realized. It consists of a square-section pipe in which are placed a two-dimensional bluff body and a strain gauge force ...
-
Article dans une revue avec comité de lectureTOMOV, Petar; KHELLADI, Sofiane; RAVELET, Florent; SARRAF, Christophe; BAKIR, Farid; VERTENOEUIL, P. (Elsevier, 2015)The injection of bubbles into an already cavitating flow is a way of influencing the typical cavitating behavior. The present article deals with experiments on aerated and non-aerated cavitation in a transparent horizontal ...
-
Article dans une revue avec comité de lectureNGUYEN, Van Thang; DANLOS, Amélie; SOLIS, Moises; KHELLADI, Sofiane; BAKIR, Farid; RAVELET, Florent; DELIGANT, Michael (MDPI AG, 2021)Centrifugal compressors are widely used in many industrial fields such as automotive, aviation, aerospace. However, these turbomachines suffer instability phenomenon when the flow rate is too high or too low, called rotating ...
-
Article dans une revue avec comité de lectureKURUNERU, Sahan Trushad Wickramasooriya; MARECHAL, Ewen; SAURET, Emilie; KHELLADI, Sofiane; SAHA, Suvash Chandra; GU, Yuantong; RAVELET, Florent; DELIGANT, Michael (Springer Verlag, 2018)The exorbitant economic and environmental cost associated with fouling propels the need to develop advanced numerical methods to accurately decipher the underlying phenomena of fouling and multiphase fluid transport. The ...
-
Article dans une revue avec comité de lectureNGUYEN, Van-Thang; ABED, Cheikh Brahim; DANLOS, Amelie; PARIDAENS, Richard; KHELLADI, Sofiane; BAKIR, Farid; RAVELET, Florent; DELIGANT, Michael (American Society of Mechanical Engineers, 2021)The present study deals with a low pressure-ratio centrifugal compressor consisting of two counter-rotating rotors called a Counter-Rotating Centrifugal Compressor (CRCC). The design method based on the loss model was ...