Stereolithography of (meth)acrylate-based photocurable resin: Thermal and mechanical properties
Article dans une revue avec comité de lecture
Author
Date
2022Journal
Journal of Applied Polymer ScienceAbstract
Additive manufacturing (AM) has attracted a lot of attention in the industry and studies due to the ability to fabricate parts in different sizes and shapes along with economic costs. Among the different three-dimensional (3D) print ing methods, stereolithography (SLA) is becoming an important method. The objective of this work is to investigate the effect of different sub-build orienta tions of an acrylate-based 3D printing SLA rapid-prototyping photosensitive resin concerning UV and thermal post-curing on the thermal and mechanical properties. Key role of polymerization as a determining factor in the final mechanical and thermal properties was shown. The results indicate turning the mechanical properties of cured resin by different sub-build orientations. Furthermore, post-curing process was performed in order to complete the cur ing of unreacted monomers. The results show the important effect of thermal post-curing on the mechanical properties. In addition, a polymerization up to 98% for thermal curing at 80 C was achieved. In addition, the maximum ten sile strength for the maximum amount of polymerization was for sub-building orientation of 45°C, 0°C, and 90°C.
Files in this item
Related items
Showing items related by title, author, creator and subject.
-
Article dans une revue avec comité de lectureSHIRINBAYAN, Mohammadali; ZIRAK, Nader; SADDAOUI, Ouiza; MAMMERI, Amrid; AZZOUZ, Kamel; BENFRIHA, Khaled; TCHARKHTCHI, Abbas; FITOUSSI, Joseph (Springer Science and Business Media LLC, 2022-10)Stereolithography (SLA) is becoming an important fabrication method among the different additive manufacturing techniques. This study investigates the effect of high strain rate on mechanical behavior, considering the fact ...
-
Article dans une revue avec comité de lectureImpellers are referred to as a core component of turbomachinery. The use of impellers in various applications is considered an integral part of the industry. So, increased performance and the optimization of impellers have ...
-
Article dans une revue avec comité de lectureSHAKERI, Zohreh; ZIRAK, Nader; SHIRINBAYAN, Mohammadali; BENFRIHA, Khaled (Springer Science and Business Media LLC, 2022-07-30)AbstractThis paper investigates the effect of different additive manufacturing process parameters such as chamber temperature, Printing temperature, layer thickness, and print speed on five essential parameters that ...
-
Article dans une revue avec comité de lectureSHAKERI, Zohreh; ZIRAK, Nader; SHIRINBAYAN, Mohammadali; BENFRIHA, Khaled (Springer nature, 2022-07)This paper investigates the effect of different additive manufacturing process parameters such as chamber temperature, Printing temperature, layer thickness, and print speed on five essential parameters that characterize ...
-
Article dans une revue avec comité de lectureThe effect of molecular weight on the crystallization behavior of poly(lactic acid) (PLA) both isothermally and non-isothermally was studied using differential scanning calorimetry and polarized optical microscopy. Two ...