Validation of a purely elastic model and a finite element model for a screw press
Communication avec acte
Résumé
The increasing use of superalloys in the industry brings new issues to forging manufacturers concerning Finite Element analysis of the forming process. Once we consider high performing materials, significant differences can occur between numerical and experimental results. The lack of knowledge about materials and thermal exchanges explains a part of these differences but it has been shown that the machine behavior has a significant impact on the forging process. Press modelling is a way to quantify the energy dissipated in the machine structure and improve simulations. This study is a first step in the screw press modelling. Starting from an approximation of the press geometries, a purely static elastic (PSE) model is developed and a numerical simulation considering only uprights is performed. Uprights stiffness predictions from the PSE model and the FE simulation are compared and the PSE model is validated. Then, the press is approximated by a portal frame and FE simulation is realized to determined uprights stiffness by considering links effects and bending behaviors in the structure. Comparison with experimental results validates the approximation.
Fichier(s) constituant cette publication
- Nom:
- LCFC_ESAFORM_2019_DURANDC.pdf
- Taille:
- 693.0Ko
- Format:
- Description:
- article conférence comité lecture
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication avec acteMULL, Jean-François;
DURAND, Camille;
BAUDOUIN, Cyrille;
BIGOT, Regis (Springer International Publishing, 2021-07)
In forging processes, the determination of blow efficiency is very important, as it quantifies the part of the stroke energy actually transmitted to the billet. Thus, forging processes should be deeply analyzed in order ... -
Communication avec acte
DURAND, Camille; MULL, Jean Francois;
BAUDOUIN, Cyrille;
BIGOT, Regis (Association Française de Mécanique (AFM), 2019-09)
The increasing use of superalloys in the forging industry induces the development of new manufacturing processes. These new processes are set up thanks to Finite Element simulation. But regarding the prediction of the ... -
A new tailored solution to predict blow efficiency and energy consumption of hammer-forging machines Article dans une revue avec comité de lectureEnergy saving has become a real issue in process management and has led to the analysis of the energy consumption of forging machines, for the purpose of optimization. This study focuses on the amount of energy lost due ...
-
Article dans une revue avec comité de lectureBORSENBERGER, Marc; BENABOU, Abdelkader; FAVEROLLE, Pierre; MIPO, Jean-Claude;
BAUDOUIN, Cyrille;
BIGOT, Regis (IOS Press, 2018)
Magnetic parts are usually composed of a stack of electrical steel laminations to reduce the eddy current losses. However, for cost reasons or for specific applications the magnetic core can be made from massive steel and ... -
Communication avec acteBORSENBERGER, Marc; BENABOU, Abdelkader;
BAUDOUIN, Cyrille;
BIGOT, Regis; FAVEROLLE, Pierre; MIPO, Jean-Claude (Verlag Der Technischen Universität Graz, 2016-09)
Magnetic parts are usually composed of a stack of electrical steel laminations to reduce the eddy current losses. However, for cost reasons or for specific applications the magnetic core can be made from massive steel and ...