Towards in-situ fumes composition monitoring during an additive manufacturing process using energy dispersive X-ray fluorescence spectrometry
Article dans une revue avec comité de lecture
Auteur
STOLIDI, Adrien TOURON, Anthony TOULEMONDE, LoïcHUGUES PARADIS LAPOUGE, Pierre COSTE, FREDERICJEAN-PAUL GARANDETRésumé
We present an in-situ energy dispersive X-ray fluorescence measurement of the content of Chromium and Nickel in the fumes produced by selective laser melting on an Inconel 625 powder. Significant variations of the intensities of the Chromium and Nickel K fluorescence lines were evidenced as a function of the laser power, lasing velocity and chamber atmosphere. Calibration has been carried out using Monte–Carlo particle transport simulations allowed to obtain a quantitative estimate of the Chromium and Nickel mass fraction in the fumes. The experimental data has been compared to the predictions of an analytical physico-chemical model with consistent results. This approach thus also allows to provide information on the temperature of the metallic bath.
Fichier(s) constituant cette publication
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Article dans une revue avec comité de lectureDELACROIX, Timothée; LOMELLO, Fernando; ; MASKROT, Hicham; JACQUIER, Vincent; LAPOUGE, Pierre; COSTE, FREDERIC; GARANDET, Jean Paul (2023)
Costs and resource efficiency of laser powder bed fusion (L-PBF) are highly dependent on the ability to produce high quality parts with recycled powders. There is a need to control the quality of the material, which has a ...
-
Article dans une revue avec comité de lecture;HEBRARD, Louis; ; LAPOUGE, Pierre; ; PEYRE, Patrice; ; ; ; (AIP Publishing, 2022-08)
We describe our miniature laser powder bed fusion (L-PBF) system for in situ synchrotron x-ray micro-computed tomography (XCT) at the European Synchrotron Radiation Facility. This replicator was designed to extend the ...
-
Communication avec acte; ; ; ; ; ; ;SEMAIL, Eric; KESTELYN, Xavier (IEEE, 2006)
Causal Ordering Graph and Energetic Macroscopic Representation are graphical descriptions to model electromechanical systems using integral causality. Inversion rules have been defined in order to deduce control structure ...
-
Article dans une revue avec comité de lecture; ; ;SCHNEIDER, Matthieu (Elsevier, 2019)
Laser heat treatment of galvanised steels with a martensite content superior to 80% were performed on a 1 cm wide area over an extensive temperature range [620 K - 1350 K]. The material softening induced is studied through ...
-
Article dans une revue avec comité de lectureNORDET, Guillaume; ; ; LAPOUGE, Pierre; ; ; PEYRE, Patrice (Springer Science and Business Media LLC, 2024-07)
In the current work, and for the first time, two 1 kW continuous wave (CW) lasers, with green and infrared (IR) wavelengths, were used to manufacture pure copper with the laser powder bed fusion (LPBF) process. Copper is ...
