Battery Tray Fixture Stiffness and Damping Modeling for Surface Quality Prediction
Communication avec acte
Auteur
RAFFESTIN, Marc URVILLE, Cyrille LORONG, Philippe GUSKOV, MikhailRésumé
Energetic transition in automotive industry leads to production of new parts such as battery trays. These parts present machining challenges linked to their vibration. It was shown that dynamic model accuracy is highly conditioned by fixture modeling. In the present work a clamping modeling approach for machining simulation is presented. Updating methodology of fixture stiffness and damping, based on dynamic reduction, is detailed. It allows to assess the influence of fixture on part dynamic behaviour in machining. Numerical predictions of ma chined surface geometry are compared to experiments on a battery tray part.
Fichier(s) constituant cette publication
Ce document est diffusé sous licence CC BY-NC-ND
Cette publication figure dans le(s) laboratoire(s) suivant(s)
Documents liés
Visualiser des documents liés par titre, auteur, créateur et sujet.
-
Communication avec acte; ; ;LORONG, Philippe; GUSKOV, Mikhail (ELSEVIER, 2015)
Thin tubular parts are often subject to turning process during manufacturing. The increasing compliance of the workpiece, which is associated to tool displacement and to matter removal, can give rise to chatter, leading ...
-
Communication avec acte; ; ;LORONG, Philippe; GUSKOV, Mikhail (2016)
Chatter prediction is nowadays frequently carried out for machining operations involving deformable parts or tools. These analyses are commonly based on the uncoupled elements of the system: frequency response of the ...
-
Communication avec acte; ; ;LORONG, Philippe; GUSKOV, Mikhail (Springer International Publishing Switzerland, 2015)
Cutting forces measurement is an important component of the ma- chining processes development and control. The use of conventional direct meas- urement systems is often impossible as they interfere in the process’s dynamics. ...
-
Communication avec acte; ; ;LORONG, Philippe; GUSKOV, Mikhail (ASME, 2012)
Milling is used to create very complex geometries and thin parts, such as turbine blades. Irreversible geometric defects may appear during finishing operations when a high surface quality is expected. Relative vibrations ...
-
Communication sans acte; ; ; ;LORONG, Philippe; GUSKOV, Mikhail (2013)
Présentation concernant la modélisation des phénomènes dynamiques en usinage. Cette modélisation a pour particularité de permettre la prédiction de la géométrie des surfaces usinées (défauts de forme, d'ondulation) que la ...