An investigation on the kinetics of lead recovery from smelting furnace slag using hydrochloric acid
Article dans une revue avec comité de lecture
Date
2015-01Journal
Russian Journal of Non-Ferrous MetalsAbstract
With regard to the large amount produced from this type of slag in flash lead smelting furnace of Ghaniabad plant and considerable lead content of the slag, the recovery of lead is of prime importance. This research work was under taken to study the lead recovery from the mentioned slag using a hydrometallurgical process. Solving in water is done on slag for 30 minutes. XRD analysis showed that PbS is the main mineral in the slag and the difference between washed and unwashed samples is lack of Na2O in washed one so that before washing this compound existed. The slag sample was first crushed and washed in distilled water. The residue was classified into different sizes. The slag powder was then leached in Hydrochloric acid under different conditions to evaluate the effect of such parameters as pH, temperature and slag particle size on the dissolution rate of lead. It was depicted that the most critical parameter affecting the leaching rate is pH whereby the decrease of down to negative number the leaching rate increased pH significantly. Finally kinetic study of slag leaching showed that the diffusion of in the solid particle controlled the lead leaches process. This was confirmed by calculation of activation energy where was obtained as 9.47 kJ mol−1 calculated.
Files in this item
- Name:
- PIMM_RJNFM_2015_SHIRINBAYAN.pdf
- Size:
- 407.0Kb
- Format:
- Description:
- An investigation on the kinetics ...
Related items
Showing items related by title, author, creator and subject.
-
High strain rate visco-damageable behavior of Advanced Sheet Molding Compound (A-SMC) under tension Article dans une revue avec comité de lecture
SHIRINBAYAN, Mohammadali;
FITOUSSI, Joseph;
MERAGHNI, Fodil; SUROWIEC, Benjamin; BOCQUET, Michel;
TCHARKHTCHI, Abbas (Elsevier, 2015)
Advanced Sheet Molding Compound (A-SMC) is a serious composite material candidate for structural automotive parts. It has a thermoset matrix and consists of high weight content of glass fibers (50% in mass) compared to ... -
Influence of loading conditions on the overall mechanical behavior of polyether-ether-ketone (PEEK) Article dans une revue avec comité de lectureABBASNEZHAD, Navideh; KHAVANDI, Alireza; ARABI, Hossein;
SHIRINBAYAN, Mohammadali;
TCHARKHTCHI, Abbas;
FITOUSSI, Joseph (Elsevier, 2018)
Testing methods have been developed to compare the mechanical responses and failure behavior of polyether-ether-keton (PEEK) thermoplastic polymer; under quasi-static, high strain rate tensile tests and fatigue loading. ... -
Article dans une revue avec comité de lecturePEIYUAN, Zuo;
SHIRINBAYAN, Mohammadali;
TCHARKHTCHI, Abbas;
FITOUSSI, Joseph;
BAKIR, Farid (Wiley, 2019)
In this paper, the thermo-oxidation for a short glass fiber–reinforced polyphenylene sulfide (PPS/GF) composite was experimentally and theoretically studied by a wide range of physicochemical and mechanical techniques. The ... -
Article dans une revue avec comité de lecture
SHIRINBAYAN, Mohammadali;
FITOUSSI, Joseph;
MERAGHNI, Fodil; SUROWIEC, Benjamin; LARIBI, M. A.;
TCHARKHTCHI, Abbas (SAGE Publications, 2017)
This paper presents the experimental results of tension-tension stress-controlled fatigue tests performed on advanced sheet molding compound (A-SMC). It aims at analyzing the effect of fiber orientation, loading amplitude, ... -
Article dans une revue avec comité de lectureZUO, Peiyuan; BENEVIDES, R.C.; LARIBI, M.A.;
SHIRINBAYAN, Mohammadali;
TCHARKHTCHI, Abbas;
FITOUSSI, Joseph;
BAKIR, Farid (Elsevier, 2018)
In this paper, two kinds of PPS/GF composite samples (PPS-0°, PPS-90°) were prepared with two different fiber main orientations related to the injection direction. A wide range of their properties were discussed. Using ...
